Prototype print release only. Not approved for production. Order coupons first. Do not order the large shell until gates G0-G5 and G9 close with measurements.
Nothing has been printed or measured. Donor and display dimensions are unmeasured or photo-derived. No FEA was run. There is no child load rating, and no tip, thermal, electrical or acoustic validation. The rear cover-storage dock is a viewer concept with no CAD or BOM here.
The engineering package omits detailed manufacturer reference CAD. It includes official download links and a SHA256-checking fetch helper at mechanical/src/ref_models/fetch_references.py. Run that before rebuilding the full checks. The public STEP and viewer retain project-created envelope references; fabrication geometry is unchanged.
| Envelope | 355 wide x 415.4 deep x 338.0 high mm |
| Typing key top / white key top | 73.3 / 31.0 mm above the table |
| Typing bed to black key top | 6.4 mm (3.4 mm if black tops measure at the 32 mm upper estimate) |
| Flat black-key top ahead of the typing lip | 25.05 mm, from photo estimates; needs a hand test |
| Wall | 3.2 mm |
| Speaker net volume | L 583.6 / R 583.9 cm³ (assumes 50 cm³ per driver) |
The pad, volume tyre and mic boots are process-gated by gate G0. There is no blanket approval of TPU 88A. A supplier must accept the actual wall thickness, and each part is confirmed separately. FDM 95A is a separate option with its own checks.
Geometry review only.

Revision E-mech-r1. CAD QA generated 2026-11-06T05:24:51.505517+00:00.