Revision E-mech-r1, 2026-11-06T05:24:53.202847+00:00. Adapted from the Model M build by the Model E mechanical worker (claude-opus-5-5, high). Selection status: FROZEN by root 2026-11-06 for reference geometry: optimization/provisional-selected.json and results.json frozenParams (height 245, tilt 18, setback 180, rear 92, deck 62.5, drop 23, slope 0). Remaining keys are the Model E defaults in web/otterchip-model-e.js.
Each STL holds one part geometry; quantity is not multiplied inside the file. Stage 3MF bundles hold one object per part and can mix PA12, TPU and conditional parts, so they are inspection collections, not print jobs. Duplicate meshes or set quantities from print-schedule.csv (for example, 6 of each shim). Flexible parts are process-gated by G0, with no blanket 88A approval.
Floor 3.2 mm + land 1.3 mm = 4.5 mm before the shim; the bed is 3 mm. Each screw needs at least 2 mm thread engagement and at least 0.3 mm tip recess below the top of the bed. That gives a length of 6.5 to 7.2 mm plus the shim thickness. Measure the real stack: it overrides this table, and no protruding screw is allowed.
| shim | allowed length | use | engagement | tip recess |
|---|---|---|---|---|
| 0.5 | 7.0 to 7.7 | trim an 8 mm screw to 7.5 | 2.5 | 0.5 |
| 1.0 | 7.5 to 8.2 | 8 mm screw as supplied (nominal) | 2.5 | 0.5 |
| 2.0 | 8.5 to 9.2 | trim a 10 mm screw to 9 | 2.5 | 0.5 |
Sourcing and audio snapshots with hashes: component references (published site). In the engineering package or repository, use ../../../manufacturing/component-references/index.html from this file. Manufacturer CAD used as references is in mechanical/src/ref_models/.
| part | qty | material | stage | print extents |
|---|---|---|---|---|
| shell_front | 1 | rigid PA12 (MJF/SLS) | B_prototype_shell | 355.0x175.8x60.73 |
| shell_rear_lower | 1 | rigid PA12 (MJF/SLS) | B_prototype_shell | 355.0x239.62x134.9 |
| shell_head | 1 | rigid PA12 (MJF/SLS) | B_prototype_shell | 355.0x150.26x201.11 |
| cushion_carrier | 1 | rigid PA12 (MJF/SLS) | B_prototype_parts | 355.0x62.45x53.5 |
| wrist_pad_tpu | 1 | flexible TPU | B_prototype_parts | 303.6x44.6x14.6 |
| instrument_deck_rear | 1 | rigid PA12 (MJF/SLS) | B_prototype_parts | 338.4x40.35x25.0 |
| instrument_deck_wing_L | 1 | rigid PA12 (MJF/SLS) | B_prototype_parts | 22.1x63.6x2.0 |
| instrument_deck_wing_R | 1 | rigid PA12 (MJF/SLS) | B_prototype_parts | 22.1x63.6x2.0 |
| bed_drill_template | 1 | cheap FDM (PLA/PETG) | A_fit_and_beds | 293.0x96.9x2.0 |
| shim_1p0mm | 6 | rigid PA12 (MJF/SLS) | A_fit_and_beds | 18.0x18.0x1.0 |
| shim_2p0mm | 6 | rigid PA12 (MJF/SLS) | A_fit_and_beds | 18.0x18.0x2.0 |
| wheel_cradle_L | 1 | rigid PA12 (MJF/SLS) | B_prototype_parts | 19.0x41.5x24.3 |
| wheel_cradle_R | 1 | rigid PA12 (MJF/SLS) | B_prototype_parts | 19.0x41.5x24.3 |
| controller_tray | 1 | rigid PA12 (MJF/SLS) | B_prototype_parts | 40.0x80.0x12.8 |
| display_carrier | 1 | rigid PA12 (MJF/SLS) | B_prototype_parts | 110.0x168.0x10.5 |
| display_spacer_frame | 1 | rigid PA12 (MJF/SLS) | B_prototype_parts | 249.29x12.55x166.87 |
| speaker_chamber_L | 1 | rigid PA12 (MJF/SLS) | B_prototype_parts | 85.0x130.0x87.05 |
| speaker_baffle_L | 1 | rigid PA12 (MJF/SLS) | B_prototype_parts | 85.0x182.09x41.8 |
| grille_insert_L | 1 | rigid PA12 (MJF/SLS) | B_prototype_parts | 36.8x18.8x166.77 |
| speaker_chamber_R | 1 | rigid PA12 (MJF/SLS) | B_prototype_parts | 85.0x110.0x101.05 |
| speaker_baffle_R | 1 | rigid PA12 (MJF/SLS) | B_prototype_parts | 85.0x182.09x27.8 |
| grille_insert_R | 1 | rigid PA12 (MJF/SLS) | B_prototype_parts | 36.8x18.8x166.77 |
| port_plate_side_left | 1 | rigid PA12 (MJF/SLS) | B_prototype_parts | 13.2x67.0x21.5 |
| port_plate_side_right | 1 | rigid PA12 (MJF/SLS) | B_prototype_parts | 13.2x51.0x19.5 |
| port_plate_rear_a | 1 | rigid PA12 (MJF/SLS) | B_prototype_parts | 85.0x13.2x23.5 |
| port_plate_rear_b | 1 | rigid PA12 (MJF/SLS) | B_prototype_parts | 85.0x13.2x23.5 |
| volume_bracket_upper | 1 | rigid PA12 (MJF/SLS) | B_prototype_parts | 38.3x36.0x47.9 |
| volume_bracket_lower | 1 | rigid PA12 (MJF/SLS) | B_prototype_parts | 38.3x36.0x17.5 |
| volume_roller_core | 1 | rigid PA12 (MJF/SLS) | B_prototype_parts | 47.58x47.59x10.0 |
| volume_roller_tyre_tpu | 1 | flexible TPU | B_prototype_parts | 49.99x49.99x8.0 |
| service_panel | 1 | rigid PA12 (MJF/SLS) | B_prototype_parts | 267.4x219.72x11.0 |
| pui_amp_carrier | 1 | rigid PA12 (MJF/SLS) | B_prototype_parts | 83.5x68.0x6.99 |
| hb1_carrier | 1 | rigid PA12 (MJF/SLS) | B_prototype_parts | 79.0x49.0x8.49 |
| pi_bracket | 1 | rigid PA12 (MJF/SLS) | B_prototype_parts | 133.0x11.0x100.0 |
| mic_boot_tpu_L | 1 | flexible TPU | B_prototype_parts | 13.59x13.6x9.0 |
| mic_boot_tpu_R | 1 | flexible TPU | B_prototype_parts | 13.59x13.6x9.0 |
| jack_saddle | 1 | rigid PA12 (MJF/SLS) | B_prototype_parts | 24.0x56.5x31.5 |
| cpn_display_corner_seat | 1 | rigid PA12 (MJF/SLS) | A_fit_coupons | 99.5x56.0x30.04 |
| cpn_typing_well_corner | 1 | rigid PA12 (MJF/SLS) | A_fit_coupons | 65.5x122.0x32.23 |
| cpn_front_right_bay_corner | 1 | rigid PA12 (MJF/SLS) | A_fit_coupons | 77.5x59.8x33.5 |
| cpn_carrier_corner | 1 | rigid PA12 (MJF/SLS) | A_fit_coupons | 77.5x62.45x53.5 |
| cpn_keybed_profile_gauge | 1 | rigid PA12 (MJF/SLS) | A_fit_coupons | 8.0x175.67x60.73 |
| cpn_floor_land_window | 1 | rigid PA12 (MJF/SLS) | A_fit_coupons | 86.5x26.0x4.5 |
| cpn_side_jack_window | 1 | rigid PA12 (MJF/SLS) | A_fit_coupons | 11.2x80.0x36.0 |
| cpn_grille_window_section | 1 | rigid PA12 (MJF/SLS) | A_fit_coupons | 47.5x34.0x24.0 |
| cpn_grille_insert_section | 1 | rigid PA12 (MJF/SLS) | A_fit_coupons | 36.8x33.38x18.8 |
| cpn_pad_segment_tpu | 1 | flexible TPU | A_fit_coupons | 55.5x44.6x14.6 |
| cpn_pad_carrier_segment | 1 | rigid PA12 (MJF/SLS) | A_fit_coupons | 66.0x58.45x9.5 |
| cpn_tolerance_ladder | 1 | rigid PA12 (MJF/SLS) | A_fit_coupons | 110.0x46.0x10.0 |
| cpn_tolerance_pegs | 1 | rigid PA12 (MJF/SLS) | A_fit_coupons | 104.0x12.0x11.9 |
| cpn_insert_ladder | 1 | rigid PA12 (MJF/SLS) | A_fit_coupons | 96.0x44.0x12.0 |
| cpn_bearing_shaft_ladder | 1 | rigid PA12 (MJF/SLS) | A_fit_coupons | 100.0x34.0x8.0 |
| cpn_dc_inlet_cutout | 1 | rigid PA12 (MJF/SLS) | A_fit_coupons | 78.0x30.0x3.0 |
| cpn_side_profile_template | 1 | cheap FDM (PLA/PETG) | A_fit_coupons | 336.01x415.42x3.0 |
Not selected (files kept): shell_onepiece, shim_0p5mm, acoustic_head_section_R, acoustic_display_mock_R. The print ZIP can be assembled from docs/part-manifest.json (selected_first_build, in_assembly, stl_print, stl_assembled).
| id | part | stock | size | qty | features |
|---|---|---|---|---|---|
| MC01 | typing bed plate | aluminium 5052/6061 sheet 3.0 mm | 317.0 x 94.0 x 3.0 | 1 | 6 x M3 tapped (drill 2.5) at (5.5, 12.0); (5.5, 47.0); (5.5, 82.0); (311.5, 12.0); (311.5, 47.0); (311.5, 82.0) from the lower-left corner; 4 x Ø1.0 PILOT marks for GK64X standoffs at GH60 nominal (41.2, 27.6); (144.2, 46.7); (206.5, 84.9); (276.1, 27.6) - DRILL TO FIT the measured PCB only |
| MC02 | floor splice bar LEFT | aluminium flat 20 x 5 | 275.6 x 20 x 5 | 1 | 5 x Ø4.5 at [15.0, 97.62, 177.62, 247.62, 267.62] mm from the rear end (countersunk from the shell side = bar underside is plain); 2 x M3 tapped at [202.67, 264.67] for the controller tray |
| MC03 | floor splice bar RIGHT | aluminium flat 20 x 5 | 275.6 x 20 x 5 | 1 | 5 x Ø4.5 at [15.0, 97.62, 177.62, 247.62, 267.62] mm from the rear end |
| MC04 | deck posts (z=0) | aluminium flat 20 x 3 | 55.4 x 20 x 3 | 2 | plain; deburr; ends square |
| MC05 | deck posts (z=40) | aluminium flat 20 x 3 | 55.4 x 20 x 3 | 2 | plain |
| MC06 | rail posts | aluminium flat 20 x 3 | 28.4 x 20 x 3 | 2 | plain |
| MC07 | carrier crossbar (NOT a seat beam) | aluminium flat 20 x 3 | 337.6 x 20 x 3 | 1 | 3 x Ø3.4 at 68.8 / 168.8 / 268.8 from the left end, centred |
| MC08 | mod-wheel shafts | ground steel 4 mm h6 (silver steel) | Ø4 x 17.5 | 2 | D-flat 2.90 across (+0/-0.03) for 3.0 mm at one end; 1.2 cross hole 7.0 mm from the plain end (wheel mid-plane); chamfer 0.3 |
| MC09 | volume shaft | ground steel 5 mm h6 | Ø5 x 33.5 | 1 | 0.5 mm deep flat, 6 mm long centred 10.5 mm from the bottom end (set screw); chamfer 0.3 |
| MC10 | mod wheels | hardwood (maple/beech) 4 mm | Ø28 x 4 | 2 | bore 4.0 (ream to slip-fit F20); 70 deg arc slot r=9, width 2.6, 2 mm deep on the inboard face; 1.2 radial cross-pin hole |
| MC12 | headphone upper carrier | unclad G10/FR4 2.0 mm, cut from AllRockets RK-5102300 300 x 300 x 2 sheet | 80 x 48 x 2.0 | 1 | 4 corner Ø3.4 at [(6.0, 5.0), (6.0, 43.0), (74.0, 5.0), (74.0, 43.0)] (Keystone 25515 spacers, 68 x 38); 4 post Ø3.4 at [(75.42, 13.77), (75.42, 25.77), (26.42, 12.27), (26.42, 27.27)] (drill to the Adafruit 4685 standoff sample; Ø6.5 envelope kept clear); 4 tie slots 2.8 x 1.6 (ties <= 2.6 mm over the CN1/CN2 jack housings only) at [(33.42, 5.5), (33.42, 33.9), (29.42, 5.5), (29.42, 33.9)]; origin = lower-left corner (CAD x -86.0, Y 183.9) |
| MC11 | shim stock pieces | 0.5 mm full-hard carbon steel Precision Brand 16978 (alt. PET/PP/stainless) | 18 x 18 fork, 3.8 mm slot | 6 | cut by knife/laser from step/assembled/shim_0p5mm.step outline |
| MC13 | LPK25 keybed backing bed | aluminium 5052/6061 sheet 3.0 mm | 293.0 x 96.9 x 3.0 | 1 | 6 x M3 tapped (drill 2.5) at [(46.5, 30.9), (46.5, 76.9), (146.5, 30.9), (146.5, 76.9), (246.5, 30.9), (246.5, 76.9)] from the lower-left corner (x left to right, y rear to front); 2 side ears with Ø3.4 for the rear deck strip. DONOR HOLES NOT DEFINED: drill to the opened LPK25. |
DXF/SVG: docs/drawings/ (typing bed with tapped holes + GK64X pilots, keybed backing bed, floor bars, crossbar, mod-wheel shaft, volume shaft, mod wheel, flat stock). Fasteners and inserts with counts and lengths: docs/fastener-schedule.csv.