Otterchip Model E — provisional visual & pose review (phase 2)

2026-11-06 · Claude Opus 5.5 · data: review-visual-provisional.json · prior: review-initial.html

Provisional. The optimizer is still running, so the E dimensions shown are neither final nor shown to be globally optimal. Mechanical CAD is not ready, and the production review is pending. All numbers are geometric references from estimated child proportions. They are not clinical outcomes, and a lower composite score is not evidence of comfort or health benefit.

Design reviewed

Changes from M: screen height 250 (M 221), tilt 20° (10.5°), flat deck 62.5 (91, slope 4), music drop 23 (20), pad rise 7 (11), pad gap 10 (14.5), rear 100 (92), blend 70 (67), grille corner 4 (0). Width 355, setback 159, underlap 39 and all component sizes are unchanged. The headphone pair moves to the left side and power to the right. Overall size is 355 × 342 × 405 mm (M 355 × 317 × 382).

Images read: E-body, M-body, E-3-typing-side, E-3-music-side, E-6-typing-threequarter, E-6-music-threequarter, E-9-typing-side, E-12-typing-side, E-12-music-side, M-6-typing-side (all /tmp/otterchip-e-review-*.png). For the other cases I read raw metrics only.

Raw metrics (auto furniture, same algorithm; app output)

modelage·actview mmgaze°neck°incid.°*top below eye mmelbow°wrist°forearm°shoulder°keys above neutral mmwrist/arm*tip/arm*
M3 typing38014.203.712.793.9−8.527.731.61120.540.75
E3 typing36510.209.8−12.795.5−2.019.525.0830.550.76
M3 music43712.902.416.789.21.011.911.0540.520.73
E3 music4179.3010.7−9.788.91.06.65.5300.520.72
M6 typing46120.30.39.878.998.3−3.020.328.61110.560.77
E6 typing42017.902.151.990.61.015.115.7840.530.73
M6 music50118.908.481.388.91.09.78.5530.520.72
E6 music47816.004.054.988.80.55.54.3290.520.72
M9 typing48624.84.814.3123.689.01.018.917.91200.530.72
E9 typing46922.52.52.5102.189.01.014.713.7910.530.72
M9 music55622.52.512.0131.689.21.09.28.3590.530.72
E9 music53820.20.20.2108.789.20.55.64.8350.530.72
M12 typing53328.88.818.3176.489.01.016.715.71180.530.72
E12 typing51426.76.76.7154.089.11.012.912.0900.530.72
M12 music60126.26.215.7184.489.00.58.17.2570.530.72
E12 music58024.34.34.3161.489.00.54.63.6320.530.72

Furniture heights match between M and E to within 2 mm. Reach error is 0 and penetration is ≤ 0.3 mm in all 16 cases. * marks my recomputations: incidence = angle between (eye − screen centre) and the screen normal; wrist/arm and tip/arm = solved shoulder→wrist or →fingertip distance ÷ (upper arm + forearm + hand).

Achieved changes, M → provisional E (raw)

Visual observations

  1. Fluid fixed body (E-body). E has a lower deck, a taller screen with steeper tilt, and a deeper concave sweep. The front of the music bay is now clean, with no jack or switch plates, which is a clear improvement over M.
  2. Balance (E-body). The blank cream sweep between the top key row and the display bezel is about twice M's. Combined with the taller rear, the result is a monumental upper mass over a low deck. It is balanced, but the large surface may read as empty.
  3. Grilles (E-body, M-body). The grille panels appear not to share top and bottom lines with the display bezel: the left one ends high and the right one runs low. M looks the same. This may be perspective, from cheek surfaces viewed against a 20° screen. Unconfirmed; check an orthographic front view.
  4. Side features (E side views). The side face is a large flat slab with a small rectangle at screen height (also on M; purpose unconfirmed) and a small low plate near the base. The known legacy USB rectangles are excluded because the root is already removing them.
  5. Pad and cover (E-6-typing-¾). The 7 mm slim dark pad reads as flush and calm. Hands hover with no visible intersection.
  6. Music (E-6-music-¾, E-3/12-music-side). Hands sit over the exposed LPK25 keys in front of the bridge. Exported penetration is 0. I do not infer a collision from 2D overlap, but the bridge fingertip-capsule check is still pending.

Prioritised issues

Blocking visual error at this stage: none found. No real intersections are visible in the three-quarter views, and exported reach and penetration are clean.

Design recommendations

Preserve geometry (no re-optimisation needed)

  1. Sweep: add a subtle tonal split or satin band along the blend curve, or a fine engraved logotype or pin-light status line at about 40% of the sweep's height. Avoid ribs where palms slide.
  2. Edges: use one corner-radius family that matches the grille and pad corners, with a continuous radius at the sweep-to-cheek intersection.
  3. Finish: a matte cream body with a lower-gloss taupe side. Use one shared dark tone for pad, grilles and display bezel.
  4. Grilles: after verification, snap their top and bottom to the bezel lines and share the hole pitch with any vents. Keep the acoustic open area unchanged.
  5. Side ports: put the headphones on one recessed, labelled left plate and power on a matching right plate.
  6. Pad and cover: keep the pad flush, and give the cover tabs the pad's corner family and accent colour.

Changes that require objective re-evaluation

Chart presentation requirements

Known limitations