{
 "schema": "otterchip-hardware-evidence/1",
 "generated": "2026-11-05T08:46:01.411Z",
 "accessed": "2026-11-05",
 "scope": "Off-the-shelf audio connectors, power rocker, volume encoder/bearings, wood mod-wheel sensing; support-frame study and provisional child-load screening for Model M.",
 "disclaimer": "Engineering study only. No part fit, load rating, safety or compliance is certified. Stock and prices are not claimed except where a vendor page was read on the access date.",
 "modelMSnapshot": {
  "params": {
   "width": 355,
   "rear": 92,
   "backslope": 10,
   "backstand": 20,
   "round": 4,
   "display": 10.1,
   "height": 221,
   "tilt": 10.5,
   "setback": 159,
   "deck": 66.5,
   "slope": 4,
   "blend": 67,
   "front": 12,
   "padwidth": 300,
   "paddepth": 41,
   "padrise": 11,
   "padcorner": 9,
   "padroll": 6,
   "padcrown": 1.5,
   "padgap": 14.5,
   "midioverlap": 39,
   "mididrop": 18,
   "midicover": 3.5,
   "midiwheeldiameter": 28,
   "midiwheelwidth": 4,
   "midiwheelreveal": 4.5,
   "midiwheelz": 7,
   "grillewidth": 33,
   "grillewrap": 15,
   "grilleheight": 100,
   "grilleoffset": 0,
   "grillecorner": 0,
   "grillepitch": 4.5,
   "grillehole": 2.2,
   "grilleborder": 2.5,
   "controlfrontspace": 0,
   "controledge": 47,
   "controlheight": 17.5,
   "controlrecess": 2.5,
   "controljackgap": 20,
   "controlwheeloffsetY": 0,
   "controlwheeldepth": 50,
   "controlwheeldiameter": 50,
   "controlwheelthick": 10,
   "controlwheelreveal": 1,
   "controlwheelrecess": 4,
   "aspect": "16:10"
  },
  "width": 355,
  "depth": 373.3393096923828,
  "height": 309.6101379394531,
  "frontZ": 143.39909683317117,
  "rearZ": -229.9402085321777,
  "music": {
   "underlap": 39,
   "drop": 18,
   "cover": 3.5,
   "keyOpening": [
    -134.1,
    156.1
   ],
   "frontWallY": 25.5,
   "lowestControllerY": 24.321616113066018
  }
 },
 "sources": [
  {
   "id": "neutrik-nmj6hcd2-drawing",
   "label": "Neutrik ST-NMJ6HCD2 drawing",
   "url": "https://www.neutrik.com/media/8582/download/st-nmj6hcd2.PDF?v=3",
   "kind": "manufacturer",
   "accessed": "2026-11-05",
   "status": "retrieved",
   "local": "hardware/otterchip_research/hardware/sources/raw/neutrik_nmj6hcd2.pdf",
   "note": null
  },
  {
   "id": "neutrik-nmj6hcd2-page",
   "label": "Neutrik NMJ6HCD2 product page (specifications)",
   "url": "https://www.neutrik.com/en/product/nmj6hcd2",
   "kind": "manufacturer",
   "accessed": "2026-11-05",
   "status": "retrieved",
   "local": "hardware/otterchip_research/hardware/sources/raw/neutrik_nmj6hcd2.html",
   "note": "Panel thickness field blank"
  },
  {
   "id": "neutrik-nmj6hcd2-step",
   "label": "Neutrik 3-D NMJ6HCD2 STEP",
   "url": "https://www.neutrik.com/media/15276/download/3-D%20NMJ6HCD2.stp?v=1",
   "kind": "manufacturer",
   "accessed": "2026-11-05",
   "status": "retrieved",
   "local": "hardware/otterchip_research/hardware/sources/raw/neutrik_nmj6hcd2.stp",
   "note": "bbox 20.02 x 17.29 x 27.86 mm"
  },
  {
   "id": "neutrik-nmj6hfd2-drawing",
   "label": "Neutrik ST-NMJ6HFD2 drawing",
   "url": "https://www.neutrik.com/media/8586/download/st-nmj6hfd2.PDF?v=4",
   "kind": "manufacturer",
   "accessed": "2026-11-05",
   "status": "retrieved",
   "local": "hardware/otterchip_research/hardware/sources/raw/neutrik_nmj6hfd2.pdf",
   "note": null
  },
  {
   "id": "neutrik-nmj6hfd2-step",
   "label": "Neutrik nmj6hfd2 STEP",
   "url": "https://www.neutrik.com/media/14412/download/nmj6hfd2.stp?v=1",
   "kind": "manufacturer",
   "accessed": "2026-11-05",
   "status": "retrieved",
   "local": "hardware/otterchip_research/hardware/sources/raw/neutrik_nmj6hfd2.stp",
   "note": "bbox includes separated hardware; not used"
  },
  {
   "id": "neutrik-pg",
   "label": "Neutrik product guide, Plugs & Jacks 202110-V24",
   "url": "https://www.neutrik.com/media/10096/download/02%20Neutrik%20PG%20EN%20-%20Section%20Plugs%20%26%20Jacks%20-%20202110-V24.pdf?v=9",
   "kind": "manufacturer",
   "accessed": "2026-11-05",
   "status": "retrieved",
   "local": "hardware/otterchip_research/hardware/sources/raw/neutrik_pg_plugs_jacks.pdf",
   "note": null
  },
  {
   "id": "neutrik-circuits",
   "label": "Neutrik jacks circuits",
   "url": "https://www.neutrik.com/media/8557/download/jacks---circuits.pdf?v=1",
   "kind": "manufacturer",
   "accessed": "2026-11-05",
   "status": "retrieved (not reviewed in detail)",
   "local": "hardware/otterchip_research/hardware/sources/raw/neutrik_jacks_circuits.pdf",
   "note": "Check normalling break order before using SN as detect"
  },
  {
   "id": "samesky-sj435107",
   "label": "Same Sky SJ-435107 series datasheet (09/13/2024)",
   "url": "https://www.sameskydevices.com/product/resource/sj-435107.pdf",
   "kind": "manufacturer",
   "accessed": "2026-11-05",
   "status": "retrieved",
   "local": "hardware/otterchip_research/hardware/sources/raw/samesky_sj435107.pdf",
   "note": null
  },
  {
   "id": "samesky-sj4351x",
   "label": "Same Sky SJ-4351X series datasheet (09/12/2024)",
   "url": "https://www.sameskydevices.com/product/resource/sj-4351x.pdf",
   "kind": "manufacturer",
   "accessed": "2026-11-05",
   "status": "retrieved",
   "local": "hardware/otterchip_research/hardware/sources/raw/samesky_sj4351x.pdf",
   "note": null
  },
  {
   "id": "samesky-sj143502pm",
   "label": "Same Sky SJ1-43502PM datasheet (09/12/2024)",
   "url": "https://www.sameskydevices.com/product/resource/sj1-43502pm.pdf",
   "kind": "manufacturer",
   "accessed": "2026-11-05",
   "status": "retrieved",
   "local": "hardware/otterchip_research/hardware/sources/raw/samesky_sj143502pm.pdf",
   "note": null
  },
  {
   "id": "samesky-family",
   "label": "Same Sky 3.5 mm audio jack family",
   "url": "https://www.sameskydevices.com/3.5-mm-audio-jacks",
   "kind": "manufacturer",
   "accessed": "2026-11-05",
   "status": "retrieved",
   "local": null,
   "note": null
  },
  {
   "id": "ck7000-mirror",
   "label": "C&K 7000 Series catalog (third-party mirror of manufacturer PDF, created 2016-12-14)",
   "url": "https://static.chipdip.ru/lib/822/DOC031822589.pdf",
   "kind": "mirror",
   "accessed": "2026-11-05",
   "status": "retrieved",
   "local": "hardware/otterchip_research/hardware/sources/raw/mirror_ck7000_chipdip.pdf",
   "note": "Same content as https://pccomponents.com/datasheets/CK-7000.pdf"
  },
  {
   "id": "ck7000-littelfuse",
   "label": "Littelfuse C&K 7000 rocker datasheet (current)",
   "url": "https://www.littelfuse.com/assetdocs/littelfuse-ck-rocker-7000-series-datasheet?assetguid=58e0b968-377d-4b5d-b458-2488d5eb9b1f",
   "kind": "manufacturer",
   "accessed": "2026-11-05",
   "status": "blocked (HTTP 403 Access Denied to curl, headless Chrome and WebFetch)",
   "local": null,
   "note": null
  },
  {
   "id": "nkk-m-mirror",
   "label": "NKK Series M miniature rockers (Farnell-hosted copy, 2011)",
   "url": "https://www.farnell.com/datasheets/1784501.pdf",
   "kind": "mirror",
   "accessed": "2026-11-05",
   "status": "retrieved",
   "local": "hardware/otterchip_research/hardware/sources/raw/mirror_nkk_m_farnell.pdf",
   "note": null
  },
  {
   "id": "bourns-em14",
   "label": "Bourns EM14 datasheet",
   "url": "https://www.bourns.com/docs/Product-Datasheets/EM14.pdf",
   "kind": "manufacturer",
   "accessed": "2026-11-05",
   "status": "retrieved",
   "local": "hardware/otterchip_research/hardware/sources/raw/bourns_em14.pdf",
   "note": null
  },
  {
   "id": "bourns-pec11l",
   "label": "Bourns PEC11L datasheet (REV 04/26)",
   "url": "https://www.bourns.com/docs/Product-Datasheets/PEC11L.pdf",
   "kind": "manufacturer",
   "accessed": "2026-11-05",
   "status": "retrieved",
   "local": "hardware/otterchip_research/hardware/sources/raw/bourns_pec11l.pdf",
   "note": null
  },
  {
   "id": "bourns-pec11r",
   "label": "Bourns PEC11R datasheet",
   "url": "https://www.bourns.com/docs/Product-Datasheets/PEC11R.pdf",
   "kind": "manufacturer",
   "accessed": "2026-11-05",
   "status": "retrieved",
   "local": "hardware/otterchip_research/hardware/sources/raw/bourns_pec11r.pdf",
   "note": "30,000-cycle life; not chosen"
  },
  {
   "id": "bourns-3382",
   "label": "Bourns 3382 rotary position sensor datasheet",
   "url": "https://www.bourns.com/docs/Product-Datasheets/3382.pdf",
   "kind": "manufacturer",
   "accessed": "2026-11-05",
   "status": "retrieved",
   "local": "hardware/otterchip_research/hardware/sources/raw/bourns_3382.pdf",
   "note": null
  },
  {
   "id": "skf-623",
   "label": "SKF 623-2Z product page",
   "url": "https://www.skf.com/group/products/rolling-bearings/ball-bearings/deep-groove-ball-bearings/productid-623-2Z",
   "kind": "manufacturer",
   "accessed": "2026-11-05",
   "status": "retrieved (rendered)",
   "local": "hardware/otterchip_research/hardware/sources/raw/skf_623-2Z.txt",
   "note": null
  },
  {
   "id": "skf-625",
   "label": "SKF 625-2Z product page",
   "url": "https://www.skf.com/group/products/rolling-bearings/ball-bearings/deep-groove-ball-bearings/productid-625-2Z",
   "kind": "manufacturer",
   "accessed": "2026-11-05",
   "status": "retrieved (rendered)",
   "local": "hardware/otterchip_research/hardware/sources/raw/skf_625-2Z.txt",
   "note": null
  },
  {
   "id": "skf-6000",
   "label": "SKF 6000-2Z product page",
   "url": "https://www.skf.com/group/products/rolling-bearings/ball-bearings/deep-groove-ball-bearings/productid-6000-2Z",
   "kind": "manufacturer",
   "accessed": "2026-11-05",
   "status": "retrieved (rendered)",
   "local": "hardware/otterchip_research/hardware/sources/raw/skf_6000-2Z.txt",
   "note": null
  },
  {
   "id": "adafruit-6513",
   "label": "Adafruit 6513 Stereo I2S 3W amplifier (dual MAX98357A)",
   "url": "https://www.adafruit.com/product/6513",
   "kind": "vendor",
   "accessed": "2026-11-05",
   "status": "retrieved (WebFetch)",
   "local": null,
   "note": "$9.95; 99 in stock; no SD pin listed; 25.5 x 19.0 x 11.8 mm; 3.5 g"
  },
  {
   "id": "adafruit-6357",
   "label": "Adafruit 6357 AS5600 magnetic angle sensor",
   "url": "https://www.adafruit.com/product/6357",
   "kind": "vendor",
   "accessed": "2026-11-05",
   "status": "retrieved (WebFetch)",
   "local": null,
   "note": "$5.95; In stock; dimensions not stated"
  },
  {
   "id": "ams-as5600",
   "label": "ams OSRAM AS5600 page",
   "url": "https://ams-osram.com/products/sensor-solutions/position-sensors/ams-as5600-position-sensor",
   "kind": "manufacturer",
   "accessed": "2026-11-05",
   "status": "retrieved (shows a corporate notice, not specs)",
   "local": null,
   "note": null
  },
  {
   "id": "max98357a",
   "label": "Analog Devices MAX98357A/B datasheet",
   "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/MAX98357A-MAX98357B.pdf",
   "kind": "manufacturer",
   "accessed": "2026-11-05",
   "status": "not retrieved (timeouts)",
   "local": null,
   "note": null
  },
  {
   "id": "wm8960",
   "label": "Cirrus Logic WM8960",
   "url": "https://www.cirrus.com/products/wm8960/",
   "kind": "manufacturer",
   "accessed": "2026-11-05",
   "status": "not retrieved (404 / AccessDenied)",
   "local": null,
   "note": null
  },
  {
   "id": "alps-rdc50",
   "label": "Alps Alpine RDC50 position sensors",
   "url": "https://tech.alpsalpine.com/e/products/category/position-sensors/sub/01/series/rdc50/",
   "kind": "manufacturer",
   "accessed": "2026-11-05",
   "status": "not retrieved (403)",
   "local": null,
   "note": null
  },
  {
   "id": "switchcraft",
   "label": "Switchcraft drawings (112BX, 35RAPC4BHN2)",
   "url": "https://www.switchcraft.com/",
   "kind": "manufacturer",
   "accessed": "2026-11-05",
   "status": "not retrieved (HTML instead of drawings)",
   "local": null,
   "note": null
  },
  {
   "id": "rpi-overlays",
   "label": "Raspberry Pi firmware boot/overlays/README",
   "url": "https://raw.githubusercontent.com/raspberrypi/firmware/master/boot/overlays/README",
   "kind": "manufacturer",
   "accessed": "2026-11-05",
   "status": "retrieved",
   "local": "hardware/otterchip_research/hardware/sources/raw/rpi_overlays_README.txt",
   "note": null
  },
  {
   "id": "eos-pa2200",
   "label": "EOS PA 2200 material data sheet (web)",
   "url": "https://www.eos.info/polymer-solutions/polymer-materials/data-sheets/mds-pa-2200",
   "kind": "manufacturer",
   "accessed": "2026-11-05",
   "status": "retrieved",
   "local": "hardware/otterchip_research/hardware/sources/raw/eos_mds_pa2200.html",
   "note": null
  },
  {
   "id": "hp-pa12-copy",
   "label": "HP 3D High Reusability PA 12 datasheet (reseller-hosted copy, Proto3000; PDF modified 2018-12-20)",
   "url": "https://proto3000.com/wp-content/uploads/2021/07/Proto3000_HP-PA12-material-datasheet-1.pdf",
   "kind": "reseller copy of manufacturer",
   "accessed": "2026-11-05",
   "status": "retrieved",
   "local": "hardware/otterchip_research/hardware/sources/raw/mirror_hp_pa12_proto3000.pdf",
   "note": "Official hp.com PDF URL returned 404"
  },
  {
   "id": "hp-design",
   "label": "HP 3D Print Learning Center: How to design a 3D print model",
   "url": "https://www.hp.com/us-en/printers/3d-printers/learning-center/how-to-design-3d-print-model.html",
   "kind": "manufacturer",
   "accessed": "2026-11-05",
   "status": "retrieved (WebFetch)",
   "local": null,
   "note": "Walls 0.3 XY / 0.5 Z short walls; 2 mm minimum recommended for hollow parts; avoid ribs on large flat areas; >10:1 aspect warps; \"not specs\""
  },
  {
   "id": "formlabs-tough2000v2",
   "label": "Formlabs Tough 2000 Resin V2 TDS 25011072 Rev 01 (10/06/2025)",
   "url": "https://formlabs-media.formlabs.com/datasheets/25011072-TDS-ENUS-0.pdf",
   "kind": "manufacturer",
   "accessed": "2026-11-05",
   "status": "retrieved",
   "local": "hardware/otterchip_research/hardware/sources/raw/formlabs_tough2000_v2.pdf",
   "note": null
  },
  {
   "id": "cdc-wtage",
   "label": "CDC 2000 growth charts, weight-for-age data table",
   "url": "https://www.cdc.gov/growthcharts/data/zscore/wtage.csv",
   "kind": "government",
   "accessed": "2026-11-05",
   "status": "retrieved",
   "local": "hardware/otterchip_research/hardware/sources/raw/cdc_wtage.csv",
   "note": null
  }
 ],
 "catalog": {
  "schema": "otterchip-hardware-catalog/1",
  "accessed": "2026-11-05",
  "coordinates": "x right, y up, z front (mating face +z); origin = body footprint centre at body underside y=0; mm",
  "evidenceJson": "research/hardware/hardware-evidence.json",
  "reportHtml": "research/hardware/index.html",
  "tagLegend": {
   "documented": "manufacturer drawing, datasheet or product page",
   "derived": "arithmetic on documented values",
   "imageEstimate": "measured from a vendor image or graph",
   "assumed": "design clearance or placeholder chosen here",
   "unknown": "not available; must be measured"
  },
  "modelMContext": {
   "width_mm": 355,
   "display_in": 10.1,
   "aspect": "16:10",
   "deck_mm": 66.5,
   "slope_deg": 4,
   "screenCentre_mm": 221,
   "tilt_deg": 10.5,
   "rear_mm": 92,
   "frontServiceSpace_mm": 0,
   "se25Underlap_mm": 39,
   "drop_mm": 18,
   "cover_mm": 3.5,
   "frontPocketDepth_mm": 2.5,
   "frontPocketHeight_mm": 14,
   "controlCentreHeight_mm": 17.5,
   "keybedSupportBottomY_mm": 24.32,
   "note": "Values from the live otterchip.html Model M snapshot (hardware/otterchip_research/hardware/data/model_m_frame_snapshot.json)."
  },
  "integration": {
   "jackDetectAndMute": {
    "status": "Compatible architecture only; no finished circuit is specified or tested.",
    "detectSources": [
     "Same Sky SJ-435107RS: isolated normally-open switch (pins 5/6) shown on the drawing; read as a GPIO with pull-up and 20-50 ms debounce (ASSUMED values).",
     "Same Sky SJ-43515TS: tip switch (pin 5) shown on the drawing; detect sense depends on switch polarity, bench-verify.",
     "Neutrik NMJ6HCD2 / NMJ6HFD2: three normalling contacts (TN, RN, SN, rated 0.5 A @ 50 V). A normalling contact that is not in the audio path (e.g. SN) can be used as a plug sensor; confirm break sequence with the Neutrik jacks-circuits sheet and a bench plug.",
     "Same Sky SJ1-43502PM has no switch: detection would need a codec impedance/mic-bias sense (unverified) or a different jack."
    ],
    "mutePaths": [
     "Firmware: on detect, stop or zero the speaker I2S stream and route playback to a ground-referenced headphone codec/amplifier; ramp to avoid clicks.",
     "Hardware: the Adafruit #6513 product page does not list a shutdown/SD pin on its header (accessed 2026-11-05); a load switch on the amplifier VIN or a board modification would be needed for a hardware mute. Verify before relying on it.",
     "Never connect MAX98357A bridge-tied speaker outputs to a common-ground headphone sleeve."
    ]
   },
   "piGracefulShutdown": {
    "status": "Uses documented Raspberry Pi overlays; the external power controller is NOT designed here.",
    "source": {
     "label": "Raspberry Pi firmware boot/overlays/README (gpio-shutdown, gpio-poweroff)",
     "url": "https://raw.githubusercontent.com/raspberrypi/firmware/master/boot/overlays/README",
     "kind": "manufacturer",
     "accessed": "2026-11-05"
    },
    "flow": [
     "Rocker (gold logic-level contacts) is an input to an external power controller, never in series with the 5 V rail.",
     "Rocker OFF -> controller asserts a Pi GPIO configured with dtoverlay=gpio-shutdown (generates KEY_POWER; systemd-logind shuts down; default debounce 100 ms).",
     "Pi signals completion through dtoverlay=gpio-poweroff (default GPIO 26). README: it is safe to remove power any time after the initial activation; an external mechanism to remove power is REQUIRED or the kernel reports a BUG. gpio-poweroff also disables waking by driving GPIO3 low.",
     "Controller then opens the 5 V load path; a maximum shutdown timeout and a hard-off fallback are requirements for the future circuit, not specified here.",
     "Rocker ON -> controller re-enables 5 V (cold boot)."
    ]
   }
  },
  "categories": {
   "headset35": {
    "label": "3.5 mm CTIA headset socket (4-pole: tip L, ring1 R, ring2 GND, sleeve MIC per CTIA)",
    "recommended": "samesky-sj-435107rs",
    "options": {
     "samesky-sj-435107rs": {
      "maker": "Same Sky (formerly CUI Devices)",
      "mpn": "SJ-435107RS",
      "role": "Recommended PCB-mount 4-conductor jack with metal bushing and isolated detect switch",
      "status": "recommended",
      "links": {
       "datasheet": {
        "label": "SJ-435107 series datasheet, date 09/13/2024 rev 1.04",
        "url": "https://www.sameskydevices.com/product/resource/sj-435107.pdf",
        "kind": "manufacturer",
        "accessed": "2026-11-05"
       },
       "product": {
        "label": "Product page",
        "url": "https://www.sameskydevices.com/product/interconnect/connectors/audio-connectors/jacks/sj-435107rs",
        "kind": "manufacturer",
        "accessed": "2026-11-05"
       },
       "availability": [
        {
         "label": "Same Sky 3.5 mm audio jack family (distributor links from maker)",
         "url": "https://www.sameskydevices.com/3.5-mm-audio-jacks",
         "kind": "manufacturer",
         "accessed": "2026-11-05"
        }
       ]
      },
      "documented": {
       "conductors": 4,
       "pins": "sleeve, tip, ring1, ring2, isolated ring1 (5), isolated ring1 switch N-O (6)",
       "bodyLength_mm": 12,
       "bushingDia_mm": 6,
       "bushingLength_mm": 3,
       "bodyWidth_mm": 10.8,
       "bodyWidthWithTabs_mm": 11.3,
       "heightAbovePcb_mm": 7.3,
       "axisAbovePcb_mm": 4,
       "pinLength_mm": 2.4,
       "matingPlugLength_mm": 14,
       "rating": "12 Vdc 1.0 A",
       "life_cycles": 5000,
       "insertionWithdrawal_kg": [
        0.3,
        3
       ],
       "features": "grounded spring tabs, shielded, brass nickel bushing, PA66 UL94V-0 housing"
      },
      "derived": {
       "maxFrontWallForFlushBushing_mm": 3
      },
      "assumed": {
       "panelHoleDia_mm": 6.3,
       "cableServiceKeepout_mm": [
        16,
        13.3,
        27
       ],
       "pcbThickness_mm": 1.6
      },
      "unknown": [
       "mass (not published)",
       "bushing retention strength",
       "switch timing relative to ring contact"
      ],
      "mass_g": null,
      "price": null,
      "mount": {
       "type": "PCB right-angle; bushing through shell hole; PCB must be screwed to shell bosses so plug side loads go into the shell, not the solder joints",
       "panelCutout": {
        "shape": "circle",
        "dia_mm": 6.3,
        "basis": "assumed 0.3 mm over documented 6.0 bushing"
       },
       "panelThickness_mm": {
        "max": 3,
        "basis": "derived from 3.0 mm bushing length for a flush face"
       }
      },
      "fitModelM": "Fits the current 12 x 10 x 24 mm reservation at y=17.5 (body top at y=20.8, below the provisional keybed support at 24.32). Wall at the 2.5 mm pocket must be <=3 mm.",
      "envelope": {
       "body": [
        10.8,
        7.3,
        12
       ],
       "bushing": {
        "dia": 6,
        "length": 3,
        "axisY": 4
       },
       "pinsBelow": 2.4
      },
      "anchors": {
       "matingFaceZ": 7.5,
       "axisY": 4,
       "axisX": 0,
       "pcbTopY": 0
      },
      "id": "samesky-sj-435107rs",
      "group": "Recommended",
      "label": "Same Sky SJ-435107RS"
     },
     "samesky-sj-43515ts": {
      "maker": "Same Sky",
      "mpn": "SJ-43515TS",
      "role": "Lowest-profile alternative (5.0 mm tall) with tip switch; plastic bushing",
      "status": "alternative",
      "links": {
       "datasheet": {
        "label": "SJ-4351X series datasheet, date 09/12/2024",
        "url": "https://www.sameskydevices.com/product/resource/sj-4351x.pdf",
        "kind": "manufacturer",
        "accessed": "2026-11-05"
       },
       "product": {
        "label": "Product page (SJ-43514 family)",
        "url": "https://www.sameskydevices.com/product/interconnect/connectors/audio-connectors/jacks/sj-43514",
        "kind": "manufacturer",
        "accessed": "2026-11-05"
       }
      },
      "documented": {
       "conductors": 4,
       "pins": "sleeve, tip, ring1, ring2, tip switch",
       "overallLength_mm": 14,
       "bushingDia_mm": 6,
       "bushingLength_mm": 3,
       "bodyWidth_mm": 10.2,
       "axisOffsetX_mm": -0.2,
       "heightAbovePcb_mm": 5,
       "axisAbovePcb_mm": 2.25,
       "rating": "16 Vdc 300 mA",
       "terminalStrength_g": 500,
       "life_cycles": 5000,
       "note": "bushing overhangs the PCB edge per drawing"
      },
      "assumed": {
       "panelHoleDia_mm": 6.3,
       "cableServiceKeepout_mm": [
        15,
        10,
        26
       ]
      },
      "unknown": [
       "mass",
       "plastic bushing side-load strength"
      ],
      "mass_g": null,
      "price": null,
      "mount": {
       "type": "PCB edge mount; plastic bushing; needs a printed collar/bracket because a child pulling a cable side-loads the PCB",
       "panelCutout": {
        "shape": "circle",
        "dia_mm": 6.3,
        "basis": "assumed"
       },
       "panelThickness_mm": {
        "max": 3,
        "basis": "derived from bushing length"
       }
      },
      "fitModelM": "Smallest vertical envelope (5 mm) for packaging below the keybed; lower current rating is fine for headphones.",
      "envelope": {
       "body": [
        10.2,
        5,
        11
       ],
       "bushing": {
        "dia": 6,
        "length": 3,
        "axisY": 2.25
       },
       "pinsBelow": 2
      },
      "anchors": {
       "matingFaceZ": 7,
       "axisY": 2.25,
       "axisX": -0.2,
       "pcbTopY": 0
      },
      "id": "samesky-sj-43515ts",
      "group": "Alternative",
      "label": "Same Sky SJ-43515TS"
     },
     "samesky-sj1-43502pm": {
      "maker": "Same Sky",
      "mpn": "SJ1-43502PM",
      "role": "Panel-mount threaded alternative; no switch (no mechanical plug detect)",
      "status": "alternative",
      "links": {
       "datasheet": {
        "label": "SJ1-43502PM datasheet, date 09/12/2024 rev 1.03",
        "url": "https://www.sameskydevices.com/product/resource/sj1-43502pm.pdf",
        "kind": "manufacturer",
        "accessed": "2026-11-05"
       },
       "product": {
        "label": "Product page",
        "url": "https://www.sameskydevices.com/product/interconnect/connectors/audio-connectors/jacks/sj1-43502pm",
        "kind": "manufacturer",
        "accessed": "2026-11-05"
       }
      },
      "documented": {
       "conductors": 4,
       "thread": "M7 x 0.50",
       "overallLength_mm": 16.2,
       "threadLength_mm": 4.5,
       "flangeLength_mm": 1.5,
       "flangeDia_mm": 9,
       "bodyWidth_mm": 8,
       "nutAF_mm": 10,
       "nutThickness_mm": 2,
       "rating": "12 Vdc 1 A",
       "life_cycles": 5000,
       "switch": "none"
      },
      "derived": {
       "maxPanel_mm": 2.5,
       "basis": "thread 4.5 - nut 2.0"
      },
      "assumed": {
       "panelHoleDia_mm": 7.2,
       "cableServiceKeepout_mm": [
        14,
        14,
        30
       ]
      },
      "unknown": [
       "mass"
      ],
      "mass_g": null,
      "price": null,
      "mount": {
       "type": "Panel nut; solder lugs and flying wires; plug loads go straight into the panel",
       "panelCutout": {
        "shape": "circle",
        "dia_mm": 7.2,
        "basis": "assumed M7 clearance"
       },
       "panelThickness_mm": {
        "max": 2.5,
        "basis": "derived"
       }
      },
      "fitModelM": "The nut (10 A/F, 2 mm) sits in front of the panel: the 2.5 mm pocket hides it only if the wall is <=0.5 mm thick, so the pocket would need ~4.5 mm depth.",
      "envelope": {
       "body": [
        8,
        8,
        10.2
       ],
       "thread": {
        "dia": 7,
        "length": 4.5
       },
       "flange": {
        "dia": 9,
        "length": 1.5
       },
       "nut": {
        "af": 10,
        "t": 2
       }
      },
      "anchors": {
       "matingFaceZ": 8.1,
       "axisY": 4,
       "axisX": 0,
       "panelInnerZ": 3.6
      },
      "id": "samesky-sj1-43502pm",
      "group": "Alternative",
      "label": "Same Sky SJ1-43502PM"
     }
    },
    "notes": [
     "Current site placeholder Same Sky SJ-43516 (SMT) was not re-verified: its series PDF was not retrieved in this pass.",
     "All three Same Sky parts are rated 5,000 mating cycles; a child-use product should plan for a replaceable jack board."
    ]
   },
   "headphone635": {
    "label": "6.35 mm (1/4 in) stereo headphone socket",
    "recommended": "neutrik-nmj6hcd2",
    "options": {
     "neutrik-nmj6hcd2": {
      "maker": "Neutrik",
      "mpn": "NMJ6HCD2",
      "role": "Recommended: switched stereo M-jack with chrome ferrule, horizontal PCB pins",
      "status": "recommended",
      "links": {
       "datasheet": {
        "label": "Drawing ST-NMJ6HCD2 (released 26.02.2021)",
        "url": "https://www.neutrik.com/media/8582/download/st-nmj6hcd2.PDF?v=3",
        "kind": "manufacturer",
        "accessed": "2026-11-05"
       },
       "cad": {
        "label": "STEP 3-D NMJ6HCD2",
        "url": "https://www.neutrik.com/media/15276/download/3-D%20NMJ6HCD2.stp?v=1",
        "kind": "manufacturer",
        "accessed": "2026-11-05"
       },
       "product": {
        "label": "Product page with specifications",
        "url": "https://www.neutrik.com/en/product/nmj6hcd2",
        "kind": "manufacturer",
        "accessed": "2026-11-05"
       },
       "circuits": {
        "label": "Neutrik jacks circuits",
        "url": "https://www.neutrik.com/media/8557/download/jacks---circuits.pdf?v=1",
        "kind": "manufacturer",
        "accessed": "2026-11-05"
       }
      },
      "documented": {
       "bodyLength_mm": 20.61,
       "lengthWithNose_mm": 23.53,
       "noseLength_mm": 3,
       "bodyWidth_mm": 18.2,
       "bodyHeight_mm": 15.67,
       "axisFromTop_mm": 8.14,
       "pinLength_mm": 4,
       "pinDia_mm": 1.4,
       "panelCutoutDia_mm": 11.4,
       "ferruleAF_mm": 11,
       "ferruleLength_mm": 5.79,
       "washerThickness_mm": 1.2,
       "switchingContacts": 3,
       "switchRating": "0.50 A @ 50 V",
       "contactRating_A": 3,
       "life_cycles": ">10000",
       "shell": "PA 6.6 30% GR UL94 V0",
       "contacts": "CuSn6, 2 um Ag",
       "temperature_C": [
        -25,
        70
       ],
       "panelThickness": "blank on product page"
      },
      "derived": {
       "axisAboveBodyBottom_mm": 7.53,
       "stepEnvelope_mm": [
        20.02,
        17.29,
        27.86
       ],
       "ferruleProjectionFromStepOrigin_mm": 4.33,
       "maxPanelEstimate_mm": 2.9,
       "basis": "nose length 3.0 minus thread engagement; STEP origin assumed at panel face (unverified)"
      },
      "assumed": {
       "cableServiceKeepout_mm": [
        18.2,
        19.7,
        35
       ]
      },
      "unknown": [
       "published max panel thickness",
       "mass"
      ],
      "mass_g": null,
      "price": null,
      "mount": {
       "type": "PCB pins; ferrule clamps panel against the jack face; PCB also screwed to bosses",
       "panelCutout": {
        "shape": "circle",
        "dia_mm": 11.4,
        "basis": "documented"
       },
       "panelThickness_mm": {
        "max": 2.9,
        "basis": "derived estimate, verify with STEP"
       }
      },
      "fitModelM": "Body top at y=25.64 when the axis is at 17.5: 1.3 mm interference with the provisional keybed support bottom (24.32) across x -129.6..-111.4. The ferrule projects ~4.3 mm (STEP), so a 2.5 mm pocket leaves it ~1.8 mm proud: deepen the pocket to >=5 mm or lower the axis to <=16 mm.",
      "envelope": {
       "body": [
        18.2,
        15.67,
        20.61
       ],
       "nose": {
        "dia": 11,
        "length": 2.92
       },
       "ferrule": {
        "af": 11,
        "length": 4.33
       },
       "axisY": 7.53,
       "pinsBelow": 4
      },
      "anchors": {
       "matingFaceZ": 16.1,
       "axisY": 7.53,
       "axisX": 0,
       "panelInnerZ": 8.845,
       "pcbTopY": 0
      },
      "id": "neutrik-nmj6hcd2",
      "group": "Recommended",
      "label": "Neutrik NMJ6HCD2"
     },
     "neutrik-nmj6hfd2": {
      "maker": "Neutrik",
      "mpn": "NMJ6HFD2",
      "role": "Alternative: same family with full threaded nose and 15 A/F nut for a firmer panel clamp",
      "status": "alternative",
      "links": {
       "datasheet": {
        "label": "Drawing ST-NMJ6HFD2 (released 26.02.2021)",
        "url": "https://www.neutrik.com/media/8586/download/st-nmj6hfd2.PDF?v=4",
        "kind": "manufacturer",
        "accessed": "2026-11-05"
       },
       "cad": {
        "label": "STEP nmj6hfd2",
        "url": "https://www.neutrik.com/media/14412/download/nmj6hfd2.stp?v=1",
        "kind": "manufacturer",
        "accessed": "2026-11-05"
       },
       "product": {
        "label": "Product page",
        "url": "https://www.neutrik.com/en/product/nmj6hfd2",
        "kind": "manufacturer",
        "accessed": "2026-11-05"
       },
       "catalog": {
        "label": "Neutrik product guide, Plugs & Jacks 202110-V24",
        "url": "https://www.neutrik.com/media/10096/download/02%20Neutrik%20PG%20EN%20-%20Section%20Plugs%20%26%20Jacks%20-%20202110-V24.pdf?v=9",
        "kind": "manufacturer",
        "accessed": "2026-11-05"
       }
      },
      "documented": {
       "bodyLength_mm": 24,
       "threadedNose_mm": 8.85,
       "bodyWidth_mm": 18.2,
       "bodyHeight_mm": 15.84,
       "axisFromTop_mm": 8.29,
       "pinLength_mm": 4,
       "panelCutoutDia_mm": 11.2,
       "nutAF_mm": 15,
       "nutThickness_mm": 4.75,
       "washer_mm": 1.2,
       "suppliedHardware": "fixing nut and washers (catalog)"
      },
      "derived": {
       "axisAboveBodyBottom_mm": 7.55,
       "maxPanel_mm": 2.9,
       "basis": "8.85 - 4.75 - 1.2"
      },
      "assumed": {
       "cableServiceKeepout_mm": [
        18.2,
        19.8,
        38
       ]
      },
      "unknown": [
       "mass",
       "STEP envelope includes separated hardware (57.6 mm bbox), so not used"
      ],
      "mass_g": null,
      "price": null,
      "mount": {
       "type": "Threaded nose + 15 A/F nut through panel; PCB pins",
       "panelCutout": {
        "shape": "circle",
        "dia_mm": 11.2,
        "basis": "documented"
       },
       "panelThickness_mm": {
        "max": 2.9,
        "basis": "derived"
       }
      },
      "fitModelM": "The 15 A/F nut (17.3 mm across corners) does not fit the current 14 mm-tall pocket; needs a >=19 mm tall, >=5.5 mm deep pocket or an internal counterbore.",
      "envelope": {
       "body": [
        18.2,
        15.84,
        24
       ],
       "nose": {
        "dia": 11,
        "length": 8.85
       },
       "nut": {
        "af": 15,
        "t": 4.75
       },
       "axisY": 7.55,
       "pinsBelow": 4
      },
      "anchors": {
       "matingFaceZ": 16.425,
       "axisY": 7.55,
       "axisX": 0,
       "panelInnerZ": 7.575,
       "pcbTopY": 0
      },
      "id": "neutrik-nmj6hfd2",
      "group": "Alternative",
      "label": "Neutrik NMJ6HFD2"
     }
    },
    "notes": [
     "Switchcraft 112BX and 35RAPC4BHN2 were investigated, but the Switchcraft drawings were not retrievable; distributor listings conflict on contacts, and 35RAPC4BHN2 is a 3-pole stereo jack, not CTIA. Neither is used."
    ]
   },
   "powerRocker": {
    "label": "Small low-voltage recessed rocker (logic input to a power controller, not a power switch)",
    "recommended": "ck-7101j1-gold",
    "options": {
     "ck-7101j1-gold": {
      "maker": "C&K (Littelfuse)",
      "mpn": "7101 J1 series, gold B contacts (build code to confirm, e.g. 7101J1 + termination + B + E)",
      "role": "Recommended: miniature rocker, rear panel bracket mount, gold contacts for logic level",
      "status": "recommended",
      "links": {
       "datasheet": {
        "label": "C&K 7000 Series catalog (mirror of manufacturer PDF, created 2016-12-14)",
        "url": "https://static.chipdip.ru/lib/822/DOC031822589.pdf",
        "kind": "mirror",
        "accessed": "2026-11-05"
       },
       "current": {
        "label": "Current Littelfuse 7000 datasheet (HTTP 403 to automated fetch; not read)",
        "url": "https://www.littelfuse.com/assetdocs/littelfuse-ck-rocker-7000-series-datasheet?assetguid=58e0b968-377d-4b5d-b458-2488d5eb9b1f",
        "kind": "manufacturer",
        "accessed": "2026-11-05"
       },
       "product": {
        "label": "Littelfuse 7000 series page",
        "url": "https://www.littelfuse.com/products/switches/rocker-switches/7000",
        "kind": "manufacturer",
        "accessed": "2026-11-05"
       }
      },
      "documented": {
       "function": "7101 SP On-None-On",
       "actuatorLength_mm": 13.49,
       "actuatorWidth_mm": 9.27,
       "actuatorProjection_mm": 7.87,
       "bracketLength_mm": 29.36,
       "bracketWidth_mm": 6.99,
       "bracketThickness_mm": 0.61,
       "mountingHoleSpacing_mm": 23.8,
       "mountingHoleDia_mm": 2.39,
       "panelCutout_mm": [
        17.96,
        10.62
       ],
       "caseWidth_mm": 6.86,
       "caseDepth_mm": 9.4,
       "terminalLength_mm": 3.94,
       "throw_deg": 25,
       "goldRating": "B: 0.4 VA max @ 20 V AC or DC",
       "electricalLife": "7X01 models: 100,000 make-and-break cycles at full load",
       "hardware": "two each mounting screws, nuts, lockwashers and standoffs for 1/8 in panel supplied with bracket-mounted switches"
      },
      "derived": {
       "panelThicknessDesign_mm": 3.18
      },
      "imageEstimate": {
       "caseHeight_mm": 12.7,
       "basis": "read from terminal spacing .500 on drawing G-4; not a dimension of the case"
      },
      "assumed": {
       "cableServiceKeepout_mm": [
        30,
        14,
        22
       ]
      },
      "unknown": [
       "mass",
       "current revision differences: model-m.html cites a 16.87 x 9.27 actuator from the newer Littelfuse sheet, which could not be read here"
      ],
      "mass_g": null,
      "price": null,
      "mount": {
       "type": "Rear panel mount on supplied bracket with two screws through the panel; documented holes, not invented",
       "panelCutout": {
        "shape": "rect",
        "w_mm": 17.96,
        "h_mm": 10.62,
        "holes": [
         {
          "x": -11.9,
          "dia": 2.39
         },
         {
          "x": 11.9,
          "dia": 2.39
         }
        ],
        "basis": "documented"
       },
       "panelThickness_mm": {
        "max": 3.18,
        "basis": "supplied hardware for 1/8 in panels"
       }
      },
      "fitModelM": "Front pocket is 26 x 14 mm; the two bracket screws at +/-11.9 mm need 29.4 mm of wall behind the pocket, so the pocket floor must be a plate of at least 30 x 11 mm. The rocker projects 7.87 mm: keep it below the 2.5 mm pocket face by recessing the bracket plate ~5.4 mm (assumed).",
      "envelope": {
       "bracket": [
        29.36,
        6.99,
        0.61
       ],
       "actuator": [
        13.49,
        9.27,
        7.87
       ],
       "case": [
        12.7,
        6.86,
        9.4
       ],
       "terminals": 3.94
      },
      "anchors": {
       "panelInnerZ": 0,
       "axisY": 4.635,
       "actuatorFrontZ": 7.87
      },
      "id": "ck-7101j1-gold",
      "group": "Recommended",
      "label": "C&K 7101 J1 series, gold B contacts"
     },
     "nkk-m2012txg13": {
      "maker": "NKK Switches",
      "mpn": "M2012TXG13 (+ actuator/cap code to confirm)",
      "role": "Alternative: bracket PC-mount miniature rocker with gold logic contacts",
      "status": "alternative",
      "links": {
       "datasheet": {
        "label": "NKK Series M miniature rockers catalog (Farnell-hosted copy, 2011)",
        "url": "https://www.farnell.com/datasheets/1784501.pdf",
        "kind": "mirror",
        "accessed": "2026-11-05"
       },
       "product": {
        "label": "NKK Switches",
        "url": "https://www.nkkswitches.com/",
        "kind": "manufacturer",
        "accessed": "2026-11-05"
       }
      },
      "documented": {
       "circuit": "SPDT On-On",
       "contacts": "G gold over brass/copper: 0.4 VA max @ 28 V AC/DC (applicable 0.1 mA-0.1 A @ 20 mV-28 V)",
       "bodyWidthSP_mm": 8,
       "bodyLength_mm": 15.8,
       "bracketLength_mm": 11.8,
       "terminalLength_mm": 6.35,
       "actuatorProjection_mm": 8.8,
       "throw_deg": 25,
       "panelCutout_mm": {
        "AT4148/AT4149": [
         17.8,
         10.1
        ],
        "AT4150/AT4151": [
         12.7,
         12.4
        ]
       },
       "mechanicalLife": 50000,
       "electricalLifeGold": 50000,
       "case": "DAP UL94V-0"
      },
      "assumed": {
       "cableServiceKeepout_mm": [
        18,
        12,
        26
       ]
      },
      "unknown": [
       "mass",
       "actuator code/colour suffix",
       "current revision"
      ],
      "mass_g": null,
      "price": null,
      "mount": {
       "type": "PCB bracket mount; panel not clamped; PCB screwed to shell bosses positions the actuator in the cutout",
       "panelCutout": {
        "shape": "rect",
        "w_mm": 17.8,
        "h_mm": 10.1,
        "basis": "documented for AT4148/4149"
       },
       "panelThickness_mm": {
        "max": null,
        "basis": "set by PCB stand-off; not a panel clamp"
       }
      },
      "fitModelM": "Fits the 26 x 14 pocket footprint; PCB stand-off sets the flush height. No exposed screws.",
      "envelope": {
       "body": [
        15.8,
        8,
        11.8
       ],
       "actuator": [
        12,
        7,
        8.8
       ],
       "terminals": 6.35
      },
      "anchors": {
       "panelInnerZ": 11.8,
       "axisY": 4,
       "actuatorFrontZ": 20.6
      },
      "id": "nkk-m2012txg13",
      "group": "Alternative",
      "label": "NKK Switches M2012TXG13"
     }
    },
    "rejected": [
     {
      "part": "Bulgin/Arcolectric H8500, E-Switch RR1 and similar snap-in rockers",
      "reason": "mains-rated silver power contacts not specified for logic signals; 19.3 x 12.9 mm-class cutouts are larger than the 26 x 14 pocket allows with walls"
     }
    ]
   },
   "volumeEncoder": {
    "label": "Encoder or angle sensor behind a custom 50 mm side volume wheel (wheel loads carried by separate bearings)",
    "recommended": "bourns-em14-optical",
    "options": {
     "bourns-em14-optical": {
      "maker": "Bourns",
      "mpn": "EM14R0D-M20-L032N (built from the datasheet key: R bushing M10x0.75, no detent, no A/R lug, M = 6 mm flatted shaft, 20 mm, axial pins, 32 PPR, no switch; EM14R1D-M20-L032N for 32 detents; confirm with distributor)",
      "role": "Recommended long-life optical encoder",
      "status": "recommended",
      "links": {
       "datasheet": {
        "label": "EM14 datasheet",
        "url": "https://www.bourns.com/docs/Product-Datasheets/EM14.pdf",
        "kind": "manufacturer",
        "accessed": "2026-11-05"
       },
       "product": {
        "label": "Bourns EM14",
        "url": "https://www.bourns.com/products/encoders",
        "kind": "manufacturer",
        "accessed": "2026-11-05"
       }
      },
      "documented": {
       "body_mm": [
        14.25,
        14.76,
        10.03
       ],
       "bushing": "R: M10 x 0.75, 9.5 mm long",
       "shaftDia_mm": 6,
       "shaftLength_mm": [
        20,
        25
       ],
       "resolution_ppr": [
        8,
        16,
        32,
        64
       ],
       "detent": "32 detents option (8 or 32 PPR)",
       "life": "non-detent 1,000,000 cycles (2,000,000 rev) @30 rpm; detent 100,000 cycles",
       "radialPlay_in": 0.005,
       "axialStrength_lb": 35,
       "mountingTorque_Nm": 2,
       "seal": "splashproof shaft seal",
       "obsolescence": "cable/connector options 1-8 not recommended for new designs"
      },
      "assumed": {
       "cableServiceKeepout_mm": [
        20,
        20,
        18
       ]
      },
      "unknown": [
       "mass (not found in text)",
       "distributor stock not checked"
      ],
      "mass_g": null,
      "price": null,
      "mount": {
       "type": "Bushing nut into a metal or 3 mm printed encoder plate; coupled to the wheel shaft by a flexible coupling",
       "panelCutout": {
        "shape": "circle",
        "dia_mm": 10.3,
        "basis": "assumed M10 clearance"
       },
       "panelThickness_mm": {
        "max": 6,
        "basis": "assumed (9.5 bushing - nut)"
       }
      },
      "envelope": {
       "body": [
        14.25,
        10.03,
        14.76
       ],
       "bushing": {
        "dia": 10,
        "length": 9.5
       },
       "shaft": {
        "dia": 6,
        "length": 20
       },
       "pinsBelow": 3.18
      },
      "anchors": {
       "shaftAxis": "y",
       "mountingSurfaceY": 10.03,
       "shaftTipY": 30.03
      },
      "id": "bourns-em14-optical",
      "group": "Recommended",
      "label": "Bourns EM14R0D-M20-L032N"
     },
     "bourns-pec11l": {
      "maker": "Bourns",
      "mpn": "PEC11L-4xxxF-Nxxxx (no switch, flatted 6 mm shaft)",
      "role": "Value alternative: low-profile mechanical encoder",
      "status": "alternative",
      "links": {
       "datasheet": {
        "label": "PEC11L datasheet REV 04/26",
        "url": "https://www.bourns.com/docs/Product-Datasheets/PEC11L.pdf",
        "kind": "manufacturer",
        "accessed": "2026-11-05"
       },
       "product": {
        "label": "Bourns PEC11L",
        "url": "https://bourns.com/products/encoders/product-detail/contacting-encoders/pec11l",
        "kind": "manufacturer",
        "accessed": "2026-11-05"
       }
      },
      "documented": {
       "bodyWidth_mm": 11.8,
       "widthWithLugs_mm": 13.2,
       "heightWithTabs_mm": 13.6,
       "bodyDepth_mm": 4.5,
       "bushing": "M7 x 0.75",
       "bushingLength_mm": [
        5,
        7
       ],
       "shaftDia_mm": 6,
       "shaftLength_mm": [
        15,
        20,
        25
       ],
       "detents": "0/20/30/18",
       "life_cycles": 100000,
       "sideLoadStatic_kgf": 2.04,
       "pushPull_N": 100,
       "mountingTorque_Ncm": 70,
       "weightMax_g": 5
      },
      "assumed": {
       "cableServiceKeepout_mm": [
        16,
        18,
        14
       ]
      },
      "unknown": [],
      "mass_g": 5,
      "price": null,
      "mount": {
       "type": "Bushing nut; PCB pins rear facing",
       "panelCutout": {
        "shape": "circle",
        "dia_mm": 7.3,
        "basis": "assumed"
       },
       "panelThickness_mm": {
        "max": 3,
        "basis": "assumed"
       }
      },
      "envelope": {
       "body": [
        11.8,
        4.5,
        13.6
       ],
       "bushing": {
        "dia": 7,
        "length": 5
       },
       "shaft": {
        "dia": 6,
        "length": 20
       },
       "pinsBelow": 3
      },
      "anchors": {
       "shaftAxis": "y",
       "mountingSurfaceY": 4.5,
       "shaftTipY": 24.5
      },
      "id": "bourns-pec11l",
      "group": "Alternative",
      "label": "Bourns PEC11L-4xxxF-Nxxxx"
     },
     "adafruit-as5600-6357": {
      "maker": "Adafruit (ams AS5600 IC)",
      "mpn": "6357 AS5600 Magnetic Angle Sensor - STEMMA QT",
      "role": "Contactless alternative: diametric magnet on the wheel shaft end",
      "status": "alternative",
      "links": {
       "product": {
        "label": "Adafruit product 6357",
        "url": "https://www.adafruit.com/product/6357",
        "kind": "manufacturer",
        "accessed": "2026-11-05"
       },
       "guide": {
        "label": "Adafruit learning guide",
        "url": "https://learn.adafruit.com/adafruit-as5600-magnetic-angle-sensor",
        "kind": "manufacturer",
        "accessed": "2026-11-05"
       },
       "notice": {
        "label": "ams OSRAM page now shows a notice about selling non-optical sensors to Infineon; check the IC supply path",
        "url": "https://ams-osram.com/products/sensor-solutions/position-sensors/ams-as5600-position-sensor",
        "kind": "manufacturer",
        "accessed": "2026-11-05"
       }
      },
      "documented": {
       "sensingRange": "senses a rotating N/S field up to 3 mm from the chip body (product page)",
       "price_usd": 5.95,
       "stockText": "In stock (product page, 2026-11-05)"
      },
      "assumed": {
       "boardEnvelope_mm": [
        25.4,
        1.6,
        17.8
       ],
       "magnet_mm": {
        "dia": 6,
        "t": 2.5,
        "type": "diametric"
       },
       "airgap_mm": 1.5
      },
      "unknown": [
       "board dimensions not on product page",
       "mass",
       "long-term IC sourcing"
      ],
      "mass_g": null,
      "price": {
       "usd": 5.95,
       "verified": "2026-11-05 adafruit.com"
      },
      "mount": {
       "type": "Board on two bosses below the shaft end; no shaft load",
       "panelCutout": null,
       "panelThickness_mm": null
      },
      "envelope": {
       "board": [
        25.4,
        1.6,
        17.8
       ],
       "parts": 2
      },
      "anchors": {
       "shaftAxis": "y",
       "sensorFaceY": 3.6
      },
      "id": "adafruit-as5600-6357",
      "group": "Alternative",
      "label": "Adafruit 6357 AS5600 Magnetic Angle Sensor - STEMMA QT"
     }
    }
   },
   "bearings": {
    "label": "Deep groove ball bearings for the custom wheel shafts (SKF product pages)",
    "recommended": "skf-625-2z",
    "options": {
     "skf-623-2z": {
      "maker": "SKF",
      "mpn": "623-2Z",
      "role": "Mod-wheel axle support (3 mm)",
      "status": "recommended",
      "links": {
       "product": {
        "label": "SKF 623-2Z",
        "url": "https://www.skf.com/group/products/rolling-bearings/ball-bearings/deep-groove-ball-bearings/productid-623-2Z",
        "kind": "manufacturer",
        "accessed": "2026-11-05"
       }
      },
      "documented": {
       "d": 3,
       "D": 10,
       "B": 4,
       "C_kN": 0.54,
       "C0_kN": 0.18,
       "limitingSpeed_rpm": 60000
      },
      "mass_g": null,
      "unknown": [
       "mass not shown in captured page"
      ],
      "envelope": {
       "d": 3,
       "D": 10,
       "B": 4
      },
      "id": "skf-623-2z",
      "group": "Recommended",
      "label": "SKF 623-2Z"
     },
     "skf-625-2z": {
      "maker": "SKF",
      "mpn": "625-2Z",
      "role": "Volume-wheel shaft support (5 mm)",
      "status": "recommended",
      "links": {
       "product": {
        "label": "SKF 625-2Z",
        "url": "https://www.skf.com/group/products/rolling-bearings/ball-bearings/deep-groove-ball-bearings/productid-625-2Z",
        "kind": "manufacturer",
        "accessed": "2026-11-05"
       }
      },
      "documented": {
       "d": 5,
       "D": 16,
       "B": 5,
       "C_kN": 1.14,
       "C0_kN": 0.38,
       "limitingSpeed_rpm": 48000,
       "class": "SKF Explorer"
      },
      "mass_g": null,
      "unknown": [
       "mass"
      ],
      "envelope": {
       "d": 5,
       "D": 16,
       "B": 5
      },
      "id": "skf-625-2z",
      "group": "Recommended",
      "label": "SKF 625-2Z"
     },
     "skf-6000-2z": {
      "maker": "SKF",
      "mpn": "6000-2Z",
      "role": "Heavy alternative single bearing inside a 50 mm wheel hub (10 mm shaft)",
      "status": "alternative",
      "links": {
       "product": {
        "label": "SKF 6000-2Z",
        "url": "https://www.skf.com/group/products/rolling-bearings/ball-bearings/deep-groove-ball-bearings/productid-6000-2Z",
        "kind": "manufacturer",
        "accessed": "2026-11-05"
       }
      },
      "documented": {
       "d": 10,
       "D": 26,
       "B": 8,
       "C_kN": 4.75,
       "C0_kN": 1.96,
       "limitingSpeed_rpm": 34000
      },
      "mass_g": null,
      "unknown": [
       "mass"
      ],
      "envelope": {
       "d": 10,
       "D": 26,
       "B": 8
      },
      "id": "skf-6000-2z",
      "group": "Alternative",
      "label": "SKF 6000-2Z"
     }
    }
   },
   "modWheelSensor": {
    "label": "Angle sensor for the 28 x 4 mm wooden modulation wheels",
    "recommended": "bourns-3382h",
    "options": {
     "bourns-3382h": {
      "maker": "Bourns",
      "mpn": "3382H-1-103 family (H through-hole; -1 = 4 mm shaft, -2 = 3.5 mm shaft; code to confirm)",
      "role": "Recommended thin rotary position sensor (axial ~3.5 mm)",
      "status": "recommended",
      "links": {
       "datasheet": {
        "label": "3382 12 mm rotary position sensor datasheet",
        "url": "https://www.bourns.com/docs/Product-Datasheets/3382.pdf",
        "kind": "manufacturer",
        "accessed": "2026-11-05"
       }
      },
      "documented": {
       "body_mm": [
        11,
        12.04
       ],
       "axialToMountingSurface_mm": [
        2.8,
        3.5
       ],
       "rotationalLife_cycles": 1000000,
       "adjustmentAngle_deg": 330,
       "mechanicalAngle": "continuous",
       "torque_gfcm_max": 30,
       "weight_g": 0.321,
       "linearity": "+/-2 %",
       "resistance": "2.5k-100k",
       "ip": "IP40"
      },
      "assumed": {
       "cableServiceKeepout_mm": [
        14,
        16,
        8
       ]
      },
      "unknown": [
       "D-shaft engagement depth"
      ],
      "mass_g": 0.321,
      "price": null,
      "mount": {
       "type": "PCB through-hole; sensor PCB is the outboard cradle cheek; axle D-flat drives the rotor",
       "panelCutout": null,
       "panelThickness_mm": null
      },
      "envelope": {
       "body": [
        3.5,
        12.04,
        11
       ]
      },
      "anchors": {
       "shaftAxis": "x"
      },
      "id": "bourns-3382h",
      "group": "Recommended",
      "label": "Bourns 3382H-1-103"
     },
     "magnetic-as5600-end": {
      "maker": "ams AS5600 class (e.g. Adafruit 6357 for bench work)",
      "mpn": "custom PCB",
      "role": "Contactless alternative; needs a magnet on the axle end and more axial length",
      "status": "alternative",
      "links": {
       "product": {
        "label": "Adafruit product 6357",
        "url": "https://www.adafruit.com/product/6357",
        "kind": "manufacturer",
        "accessed": "2026-11-05"
       }
      },
      "documented": {
       "sensingRange": "up to 3 mm from chip body (Adafruit page)"
      },
      "assumed": {
       "stackAlongAxle_mm": 6.1,
       "basis": "magnet 2.5 + airgap 1.5 + IC 0.5 + PCB 1.6"
      },
      "unknown": [
       "custom PCB size"
      ],
      "mass_g": null,
      "price": null,
      "envelope": {
       "body": [
        6.1,
        14,
        14
       ]
      },
      "anchors": {
       "shaftAxis": "x"
      },
      "id": "magnetic-as5600-end",
      "group": "Alternative",
      "label": "ams AS5600 class custom PCB"
     }
    }
   },
   "assemblies": {
    "label": "Custom assemblies (NOT off-the-shelf): built from the catalog parts above",
    "options": {
     "volume-wheel-50": {
      "maker": "custom",
      "role": "50 x 10 mm knurled wheel cap on a 5 mm stainless shaft in two SKF 625-2Z bearings; encoder on a flexible coupling, mounted ABOVE the wheel by default (encoderAbove)",
      "status": "custom",
      "defaults": {
       "diameter": 50,
       "thickness": 10,
       "bearing": "skf-625-2z",
       "encoder": "bourns-em14-optical",
       "encoderAbove": true
      },
      "assumed": {
       "yokePlate_mm": 6,
       "gaps_mm": 0.5,
       "coupling_mm": [
        12,
        10
       ]
      },
      "notes": "Finger loads (assume <=20 N) go shaft -> bearings -> yoke -> shell boss; the encoder sees only torque. Detent feel from EM14 detent option or a separate spring plunger.",
      "id": "volume-wheel-50",
      "group": "Custom assembly",
      "label": "Custom volume wheel 50"
     },
     "wood-modwheel-28x4": {
      "maker": "custom",
      "role": "28 x 4 mm laminated hardwood wheel on a stepped 3 mm/4 mm axle, two SKF 623-2Z, Bourns 3382H outboard",
      "status": "custom",
      "defaults": {
       "diameter": 28,
       "thickness": 4,
       "bearing": "skf-623-2z",
       "sensor": "bourns-3382h"
      },
      "assumed": {
       "cheekWall_mm": 1.5,
       "gaps_mm": 0.5,
       "frictionWasher": "O-ring or wave washer (custom)",
       "travelStops": "printed stops, angle TBD"
      },
      "notes": "Requires wood with a metal or printed hub; 4 mm solid wood across 28 mm is fragile across the grain.",
      "xStack_mm": {
       "bearingsAndWheel": 13,
       "sensor": 3.5,
       "cheeks": 3,
       "total": 19.5,
       "rightBandAvailable": 19.4,
       "leftBandAvailable": 33.4,
       "verdict": "Right wheel has ~0 margin (need ~2-3 mm): use 3x6x2.5 class bearings (maker not verified here), a single-cheek overhung wheel, or shift the keybed 3 mm left."
      },
      "id": "wood-modwheel-28x4",
      "group": "Custom assembly",
      "label": "Custom wood modwheel 28x4"
     }
    }
   }
  }
 },
 "stepEnvelopes": {
  "neutrik_nmj6hcd2.stp": {
   "points": 426,
   "min": [
    -10.92,
    -3.45,
    -23.53
   ],
   "max": [
    9.1,
    13.84,
    4.326
   ],
   "size": [
    20.02,
    17.29,
    27.856
   ],
   "length_unit_prefix": [
    "MILLI"
   ],
   "products": [
    "D-NMJ6HCD2"
   ]
  },
  "neutrik_nmj6hfd2.stp": {
   "points": 10314,
   "min": [
    -24.466,
    -14.98,
    -30.036
   ],
   "max": [
    8.85,
    33.266,
    27.608
   ],
   "size": [
    33.316,
    48.246,
    57.644
   ],
   "length_unit_prefix": [
    "MILLI"
   ],
   "products": [
    "NMJ6HFD2"
   ]
  }
 },
 "assemblies": {
  "volumeWheel": {
   "bourns-em14-optical": {
    "stack_mm": 59,
    "wheelCentreFromBottom_mm": 11.5
   },
   "bourns-pec11l": {
    "stack_mm": 53.5,
    "wheelCentreFromBottom_mm": 11.5
   },
   "adafruit-as5600-6357": {
    "stack_mm": 31,
    "wheelCentreFromBottom_mm": 11.5
   }
  },
  "modWheel": {
   "bourns-3382h": {
    "xStack_mm": 19.5
   },
   "magnetic-as5600-end": {
    "xStack_mm": 22.1
   }
  },
  "rightBandAvailable_mm": 19.4
 },
 "structuralScreening": {
  "materials": {
   "MJF_PA12": {
    "label": "HP 3D High Reusability PA 12 (MJF)",
    "E_xy": 1700,
    "E_z": 1800,
    "sigma_xy": 48,
    "sigma_z": 48,
    "elong_xy_pct": 20,
    "elong_z_pct": 15,
    "density": 1.01,
    "source": "HP datasheet copy hosted by reseller Proto3000 (ASTM D638; doc created 2017-11, modified 2018-12)",
    "creep_factor_assumed": [
     0.4,
     0.6
    ],
    "creep_basis": "ASSUMPTION: no PA12 creep curve retrieved from HP; range is a placeholder until a sustained-load coupon/part test is run"
   },
   "SLS_PA12": {
    "label": "EOS PA 2200 (SLS PA12)",
    "E_xy": 1650,
    "E_z": 1650,
    "sigma_xy": 48,
    "sigma_z": 42,
    "elong_xy_pct": 18,
    "elong_z_pct": 4,
    "density": 0.93,
    "source": "EOS material data sheet web page mds-pa-2200 (ISO 527-1/-2)",
    "creep_factor_assumed": [
     0.4,
     0.6
    ],
    "creep_basis": "ASSUMPTION: no PA2200 creep curve retrieved; same placeholder as MJF"
   },
   "SLA_Tough2000V2": {
    "label": "Formlabs Tough 2000 Resin V2 (SLA, post-cured)",
    "E_xy": 1800,
    "E_z": 1800,
    "E_flex": 1701,
    "sigma_xy": 40.4,
    "sigma_z": 40.4,
    "elong_xy_pct": 79,
    "elong_z_pct": null,
    "density": null,
    "source": "Formlabs TDS 25011072 Rev 01 2025-10-06 (ASTM D638-14 / D790-17; ISO 6602 creep graph)",
    "creep_factor_assumed": null,
    "creep_basis": "Image estimate from TDS flexural creep graph (4.0 MPa, 22 C, 14 d)",
    "creep_factor_14d_at_4MPa": 0.186,
    "creep_14d_strain_pct": 1.264
   }
  },
  "process_knockdown_assumed": 0.8,
  "modulus_bands": {
   "MJF_PA12": {
    "short_nominal": 1700,
    "short_low": 1360,
    "long_low": 544,
    "long_basis": "modulus x 0.8 x ASSUMED creep factor 0.4"
   },
   "SLS_PA12": {
    "short_nominal": 1650,
    "short_low": 1320,
    "long_low": 528,
    "long_basis": "modulus x 0.8 x ASSUMED creep factor 0.4"
   },
   "SLA_Tough2000V2": {
    "short_nominal": 1800,
    "short_low": 1440,
    "long_low": 253.10880000000003,
    "long_basis": "flexural modulus x 0.8 x creep 0.19 (14 d @ 4 MPa image estimate)"
   }
  },
  "load_cases": {
   "LC1_static_seated": {
    "mass_kg": 50,
    "dynamic_factor": 1,
    "P_N": 490.5,
    "duration": "sustained (minutes to hours, repeated)",
    "use_modulus": "long_low"
   },
   "LC2_sudden_sit": {
    "mass_kg": 50,
    "dynamic_factor": 2,
    "P_N": 981,
    "duration": "impact (<0.5 s)",
    "use_modulus": "short_low"
   },
   "LC3_knee_or_foot": {
    "mass_kg": 50,
    "dynamic_factor": 2,
    "P_N": 981,
    "patch_mm": "50 dia",
    "duration": "impact / standing",
    "use_modulus": "short_low"
   }
  },
  "load_case_notes": {
   "child_mass_basis": "50 kg design child: CDC 2000 weight-for-age 95th percentile at 126.5 months is 49.3 kg (boys) / 51.5 kg (girls). Older children and adults exceed this; adults are NOT covered.",
   "dynamic_factor_basis": "ASSUMPTION: 2.0 static-equivalent for dropping into a seat or kneeling; a real drop can exceed this. Proof testing must include a drop/impact case.",
   "allowable_targets": "ASSUMED screening targets (not standards): impact peak stress <= 0.25 x datasheet strength in the weakest build direction; sustained stress <= 4 MPa for PA12 and <= 2 MPa for Tough 2000 V2 (whose 4 MPa creep test shows 1.26 % strain after 14 d); deflection at keys/screen: zero contact with 3 mm margin."
  },
  "elements": {
   "E1_carrier_plain_3p5": {
    "description": "Removable carrier top as 3.5 mm plain plate, one-way span 59.5 mm fore/aft, P over 200 mm width. Seat on carrier alone is not realistic (child also loads typing keys); shown as a lower bound.",
    "section": {
     "I_per_mm": 3.573,
     "c_top": 1.75,
     "c_bot": 1.75,
     "area_per_mm": 3.5,
     "depth": 3.5
    },
    "rows": [
     {
      "material": "MJF_PA12",
      "case": "LC1_static_seated",
      "E_used_MPa": 544,
      "deflection_mm": 3.46,
      "peak_stress_MPa": 8.9,
      "stress_ratio_vs_quarter_strength": 0.74,
      "sustained_limit_MPa": 4
     },
     {
      "material": "MJF_PA12",
      "case": "LC2_sudden_sit",
      "E_used_MPa": 1360,
      "deflection_mm": 2.77,
      "peak_stress_MPa": 17.9,
      "stress_ratio_vs_quarter_strength": 1.49,
      "sustained_limit_MPa": null
     },
     {
      "material": "SLS_PA12",
      "case": "LC1_static_seated",
      "E_used_MPa": 528,
      "deflection_mm": 3.57,
      "peak_stress_MPa": 8.9,
      "stress_ratio_vs_quarter_strength": 0.85,
      "sustained_limit_MPa": 4
     },
     {
      "material": "SLS_PA12",
      "case": "LC2_sudden_sit",
      "E_used_MPa": 1320,
      "deflection_mm": 2.85,
      "peak_stress_MPa": 17.9,
      "stress_ratio_vs_quarter_strength": 1.7,
      "sustained_limit_MPa": null
     },
     {
      "material": "SLA_Tough2000V2",
      "case": "LC1_static_seated",
      "E_used_MPa": 253,
      "deflection_mm": 7.44,
      "peak_stress_MPa": 8.9,
      "stress_ratio_vs_quarter_strength": 0.88,
      "sustained_limit_MPa": 2
     },
     {
      "material": "SLA_Tough2000V2",
      "case": "LC2_sudden_sit",
      "E_used_MPa": 1440,
      "deflection_mm": 2.62,
      "peak_stress_MPa": 17.9,
      "stress_ratio_vs_quarter_strength": 1.77,
      "sustained_limit_MPa": null
     }
    ]
   },
   "E2_carrier_ribbed": {
    "description": "Carrier with fore/aft ribs 2.0 x 8.0 mm @ 25 mm under a 3.5 mm skin (rib depth limited by key-top clearance 17.3 mm).",
    "section": {
     "I_per_mm": 24.875,
     "c_top": 2.639,
     "c_bot": 8.861,
     "area_per_mm": 4.14,
     "depth": 11.5
    },
    "rows": [
     {
      "material": "MJF_PA12",
      "case": "LC1_static_seated",
      "E_used_MPa": 544,
      "deflection_mm": 0.5,
      "peak_stress_MPa": 6.5,
      "stress_ratio_vs_quarter_strength": 0.54,
      "sustained_limit_MPa": 4
     },
     {
      "material": "MJF_PA12",
      "case": "LC2_sudden_sit",
      "E_used_MPa": 1360,
      "deflection_mm": 0.4,
      "peak_stress_MPa": 13,
      "stress_ratio_vs_quarter_strength": 1.08,
      "sustained_limit_MPa": null
     },
     {
      "material": "SLS_PA12",
      "case": "LC1_static_seated",
      "E_used_MPa": 528,
      "deflection_mm": 0.51,
      "peak_stress_MPa": 6.5,
      "stress_ratio_vs_quarter_strength": 0.62,
      "sustained_limit_MPa": 4
     },
     {
      "material": "SLS_PA12",
      "case": "LC2_sudden_sit",
      "E_used_MPa": 1320,
      "deflection_mm": 0.41,
      "peak_stress_MPa": 13,
      "stress_ratio_vs_quarter_strength": 1.24,
      "sustained_limit_MPa": null
     },
     {
      "material": "SLA_Tough2000V2",
      "case": "LC1_static_seated",
      "E_used_MPa": 253,
      "deflection_mm": 1.07,
      "peak_stress_MPa": 6.5,
      "stress_ratio_vs_quarter_strength": 0.64,
      "sustained_limit_MPa": 2
     },
     {
      "material": "SLA_Tough2000V2",
      "case": "LC2_sudden_sit",
      "E_used_MPa": 1440,
      "deflection_mm": 0.38,
      "peak_stress_MPa": 13,
      "stress_ratio_vs_quarter_strength": 1.29,
      "sustained_limit_MPa": null
     }
    ]
   },
   "E2b_carrier_ribbed_deeper": {
    "description": "Carrier with fore/aft ribs 2.0 x 10.0 mm @ 20 mm (still >= 6 mm above resting key tops).",
    "section": {
     "I_per_mm": 47.344,
     "c_top": 3.25,
     "c_bot": 10.25,
     "area_per_mm": 4.5,
     "depth": 13.5
    },
    "rows": [
     {
      "material": "MJF_PA12",
      "case": "LC1_static_seated",
      "E_used_MPa": 544,
      "deflection_mm": 0.26,
      "peak_stress_MPa": 3.9,
      "stress_ratio_vs_quarter_strength": 0.33,
      "sustained_limit_MPa": 4
     },
     {
      "material": "MJF_PA12",
      "case": "LC2_sudden_sit",
      "E_used_MPa": 1360,
      "deflection_mm": 0.21,
      "peak_stress_MPa": 7.9,
      "stress_ratio_vs_quarter_strength": 0.66,
      "sustained_limit_MPa": null
     },
     {
      "material": "SLS_PA12",
      "case": "LC1_static_seated",
      "E_used_MPa": 528,
      "deflection_mm": 0.27,
      "peak_stress_MPa": 3.9,
      "stress_ratio_vs_quarter_strength": 0.38,
      "sustained_limit_MPa": 4
     },
     {
      "material": "SLS_PA12",
      "case": "LC2_sudden_sit",
      "E_used_MPa": 1320,
      "deflection_mm": 0.22,
      "peak_stress_MPa": 7.9,
      "stress_ratio_vs_quarter_strength": 0.75,
      "sustained_limit_MPa": null
     },
     {
      "material": "SLA_Tough2000V2",
      "case": "LC1_static_seated",
      "E_used_MPa": 253,
      "deflection_mm": 0.56,
      "peak_stress_MPa": 3.9,
      "stress_ratio_vs_quarter_strength": 0.39,
      "sustained_limit_MPa": 2
     },
     {
      "material": "SLA_Tough2000V2",
      "case": "LC2_sudden_sit",
      "E_used_MPa": 1440,
      "deflection_mm": 0.2,
      "peak_stress_MPa": 7.9,
      "stress_ratio_vs_quarter_strength": 0.78,
      "sustained_limit_MPa": null
     }
    ]
   },
   "E3_seat_lid_ribbed": {
    "description": "Optional accessory lid over typing keys and music bay, one-way span 161 mm (front wall to a ledge at z=-18), 3 mm skin + 2.5x10 ribs @30 (ribs sit above keycaps).",
    "section": {
     "I_per_mm": 36.749,
     "c_top": 2.913,
     "c_bot": 10.087,
     "area_per_mm": 3.833,
     "depth": 13
    },
    "rows": [
     {
      "material": "MJF_PA12",
      "case": "LC1_static_seated",
      "E_used_MPa": 544,
      "deflection_mm": 6.72,
      "peak_stress_MPa": 13.6,
      "stress_ratio_vs_quarter_strength": 1.13,
      "sustained_limit_MPa": 4
     },
     {
      "material": "MJF_PA12",
      "case": "LC2_sudden_sit",
      "E_used_MPa": 1360,
      "deflection_mm": 5.37,
      "peak_stress_MPa": 27.2,
      "stress_ratio_vs_quarter_strength": 2.26,
      "sustained_limit_MPa": null
     },
     {
      "material": "SLS_PA12",
      "case": "LC1_static_seated",
      "E_used_MPa": 528,
      "deflection_mm": 6.92,
      "peak_stress_MPa": 13.6,
      "stress_ratio_vs_quarter_strength": 1.29,
      "sustained_limit_MPa": 4
     },
     {
      "material": "SLS_PA12",
      "case": "LC2_sudden_sit",
      "E_used_MPa": 1320,
      "deflection_mm": 5.54,
      "peak_stress_MPa": 27.2,
      "stress_ratio_vs_quarter_strength": 2.59,
      "sustained_limit_MPa": null
     },
     {
      "material": "SLA_Tough2000V2",
      "case": "LC1_static_seated",
      "E_used_MPa": 253,
      "deflection_mm": 14.43,
      "peak_stress_MPa": 13.6,
      "stress_ratio_vs_quarter_strength": 1.34,
      "sustained_limit_MPa": 2
     },
     {
      "material": "SLA_Tough2000V2",
      "case": "LC2_sudden_sit",
      "E_used_MPa": 1440,
      "deflection_mm": 5.07,
      "peak_stress_MPa": 27.2,
      "stress_ratio_vs_quarter_strength": 2.69,
      "sustained_limit_MPa": null
     }
    ]
   },
   "E3b_seat_lid_torsion_box": {
    "description": "Same lid as a twin-skin torsion box (2.0 top / 1.6 bottom skins, 2.0 ribs @30, 12 mm core).",
    "section": {
     "I_per_mm": 180.38,
     "c_top": 7.291,
     "c_bot": 8.309,
     "area_per_mm": 4.4,
     "depth": 15.6
    },
    "rows": [
     {
      "material": "MJF_PA12",
      "case": "LC1_static_seated",
      "E_used_MPa": 544,
      "deflection_mm": 1.37,
      "peak_stress_MPa": 2.3,
      "stress_ratio_vs_quarter_strength": 0.19,
      "sustained_limit_MPa": 4
     },
     {
      "material": "MJF_PA12",
      "case": "LC2_sudden_sit",
      "E_used_MPa": 1360,
      "deflection_mm": 1.09,
      "peak_stress_MPa": 4.6,
      "stress_ratio_vs_quarter_strength": 0.38,
      "sustained_limit_MPa": null
     },
     {
      "material": "SLS_PA12",
      "case": "LC1_static_seated",
      "E_used_MPa": 528,
      "deflection_mm": 1.41,
      "peak_stress_MPa": 2.3,
      "stress_ratio_vs_quarter_strength": 0.22,
      "sustained_limit_MPa": 4
     },
     {
      "material": "SLS_PA12",
      "case": "LC2_sudden_sit",
      "E_used_MPa": 1320,
      "deflection_mm": 1.13,
      "peak_stress_MPa": 4.6,
      "stress_ratio_vs_quarter_strength": 0.43,
      "sustained_limit_MPa": null
     },
     {
      "material": "SLA_Tough2000V2",
      "case": "LC1_static_seated",
      "E_used_MPa": 253,
      "deflection_mm": 2.94,
      "peak_stress_MPa": 2.3,
      "stress_ratio_vs_quarter_strength": 0.23,
      "sustained_limit_MPa": 2
     },
     {
      "material": "SLA_Tough2000V2",
      "case": "LC2_sudden_sit",
      "E_used_MPa": 1440,
      "deflection_mm": 1.03,
      "peak_stress_MPa": 4.6,
      "stress_ratio_vs_quarter_strength": 0.45,
      "sustained_limit_MPa": null
     }
    ]
   },
   "E3c_seat_lid_knee": {
    "description": "Torsion-box lid, LC3 knee/foot at mid-span, effective width 120 mm (ASSUMED load spread).",
    "section": {
     "I_per_mm": 180.38,
     "c_top": 7.291,
     "c_bot": 8.309,
     "area_per_mm": 4.4,
     "depth": 15.6
    },
    "rows": [
     {
      "material": "MJF_PA12",
      "case": "LC3_knee_or_foot",
      "E_used_MPa": 1360,
      "deflection_mm": 2.92,
      "peak_stress_MPa": 15.2,
      "stress_ratio_vs_quarter_strength": 1.27,
      "sustained_limit_MPa": null
     },
     {
      "material": "SLS_PA12",
      "case": "LC3_knee_or_foot",
      "E_used_MPa": 1320,
      "deflection_mm": 3.01,
      "peak_stress_MPa": 15.2,
      "stress_ratio_vs_quarter_strength": 1.45,
      "sustained_limit_MPa": null
     },
     {
      "material": "SLA_Tough2000V2",
      "case": "LC3_knee_or_foot",
      "E_used_MPa": 1440,
      "deflection_mm": 2.76,
      "peak_stress_MPa": 15.2,
      "stress_ratio_vs_quarter_strength": 1.5,
      "sustained_limit_MPa": null
     }
    ]
   },
   "E3d_seat_lid_box_knee_thick": {
    "description": "Torsion-box lid with 3.0 top / 2.0 bottom skins, 2.4 ribs @25, LC3 knee/foot.",
    "section": {
     "I_per_mm": 271.747,
     "c_top": 7.618,
     "c_bot": 9.382,
     "area_per_mm": 6.152,
     "depth": 17
    },
    "rows": [
     {
      "material": "MJF_PA12",
      "case": "LC3_knee_or_foot",
      "E_used_MPa": 1360,
      "deflection_mm": 1.94,
      "peak_stress_MPa": 11.4,
      "stress_ratio_vs_quarter_strength": 0.95,
      "sustained_limit_MPa": null
     },
     {
      "material": "SLS_PA12",
      "case": "LC3_knee_or_foot",
      "E_used_MPa": 1320,
      "deflection_mm": 2,
      "peak_stress_MPa": 11.4,
      "stress_ratio_vs_quarter_strength": 1.08,
      "sustained_limit_MPa": null
     },
     {
      "material": "SLA_Tough2000V2",
      "case": "LC3_knee_or_foot",
      "E_used_MPa": 1440,
      "deflection_mm": 1.83,
      "peak_stress_MPa": 11.4,
      "stress_ratio_vs_quarter_strength": 1.13,
      "sustained_limit_MPa": null
     }
    ]
   },
   "E4_deck_lip_cantilever": {
    "description": "Deck lip carrying the carrier rear ledge: cantilever 25.1 mm from a fixed front bulkhead, half of P on 200 mm, ribs 2.0x15.0 @25 above the hidden key tails.",
    "section": {
     "I_per_mm": 102.533,
     "c_top": 4.112,
     "c_bot": 14.388,
     "area_per_mm": 4.7,
     "depth": 18.5
    },
    "rows": [
     {
      "material": "MJF_PA12",
      "case": "LC1_static_seated",
      "E_used_MPa": 544,
      "deflection_mm": 0.12,
      "peak_stress_MPa": 4.3,
      "stress_ratio_vs_quarter_strength": 0.36,
      "sustained_limit_MPa": 4
     },
     {
      "material": "MJF_PA12",
      "case": "LC2_sudden_sit",
      "E_used_MPa": 1360,
      "deflection_mm": 0.09,
      "peak_stress_MPa": 8.7,
      "stress_ratio_vs_quarter_strength": 0.72,
      "sustained_limit_MPa": null
     },
     {
      "material": "SLS_PA12",
      "case": "LC1_static_seated",
      "E_used_MPa": 528,
      "deflection_mm": 0.12,
      "peak_stress_MPa": 4.3,
      "stress_ratio_vs_quarter_strength": 0.41,
      "sustained_limit_MPa": 4
     },
     {
      "material": "SLS_PA12",
      "case": "LC2_sudden_sit",
      "E_used_MPa": 1320,
      "deflection_mm": 0.1,
      "peak_stress_MPa": 8.7,
      "stress_ratio_vs_quarter_strength": 0.82,
      "sustained_limit_MPa": null
     },
     {
      "material": "SLA_Tough2000V2",
      "case": "LC1_static_seated",
      "E_used_MPa": 253,
      "deflection_mm": 0.25,
      "peak_stress_MPa": 4.3,
      "stress_ratio_vs_quarter_strength": 0.43,
      "sustained_limit_MPa": 2
     },
     {
      "material": "SLA_Tough2000V2",
      "case": "LC2_sudden_sit",
      "E_used_MPa": 1440,
      "deflection_mm": 0.09,
      "peak_stress_MPa": 8.7,
      "stress_ratio_vs_quarter_strength": 0.86,
      "sustained_limit_MPa": null
     }
    ]
   },
   "E5b_front_bay_with_centre_feet": {
    "description": "Same section with two added feet at x=+/-0 to 40 mm (span halved to ~152 mm): deflection /8, stress /2. A continuous foot strip removes the bending path entirely.",
    "rows": [
     {
      "material": "MJF_PA12",
      "case": "LC1_static_seated",
      "E_used_MPa": 544,
      "deflection_mm": 0.58,
      "peak_stress_MPa": 7.5
     },
     {
      "material": "MJF_PA12",
      "case": "LC2_sudden_sit",
      "E_used_MPa": 1360,
      "deflection_mm": 0.46,
      "peak_stress_MPa": 14.9
     },
     {
      "material": "SLS_PA12",
      "case": "LC1_static_seated",
      "E_used_MPa": 528,
      "deflection_mm": 0.59,
      "peak_stress_MPa": 7.5
     },
     {
      "material": "SLS_PA12",
      "case": "LC2_sudden_sit",
      "E_used_MPa": 1320,
      "deflection_mm": 0.47,
      "peak_stress_MPa": 14.9
     },
     {
      "material": "SLA_Tough2000V2",
      "case": "LC1_static_seated",
      "E_used_MPa": 253,
      "deflection_mm": 1.24,
      "peak_stress_MPa": 7.5
     },
     {
      "material": "SLA_Tough2000V2",
      "case": "LC2_sudden_sit",
      "E_used_MPa": 1440,
      "deflection_mm": 0.44,
      "peak_stress_MPa": 14.9
     }
    ]
   },
   "E5_front_bay_between_corner_feet": {
    "description": "Floor (80 x 2.5) + front wall (25.5 tall) + fixed front bulkhead (56.8 tall) acting as an open beam over the 305 mm span between the corner feet. Carrier and keybed are not counted.",
    "I_mm4": 115547,
    "rows": [
     {
      "material": "MJF_PA12",
      "case": "LC1_static_seated",
      "E_used_MPa": 544,
      "deflection_mm": 4.61,
      "peak_stress_MPa": 14.9
     },
     {
      "material": "MJF_PA12",
      "case": "LC2_sudden_sit",
      "E_used_MPa": 1360,
      "deflection_mm": 3.69,
      "peak_stress_MPa": 29.8
     },
     {
      "material": "SLS_PA12",
      "case": "LC1_static_seated",
      "E_used_MPa": 528,
      "deflection_mm": 4.75,
      "peak_stress_MPa": 14.9
     },
     {
      "material": "SLS_PA12",
      "case": "LC2_sudden_sit",
      "E_used_MPa": 1320,
      "deflection_mm": 3.8,
      "peak_stress_MPa": 29.8
     },
     {
      "material": "SLA_Tough2000V2",
      "case": "LC1_static_seated",
      "E_used_MPa": 253,
      "deflection_mm": 9.91,
      "peak_stress_MPa": 14.9
     },
     {
      "material": "SLA_Tough2000V2",
      "case": "LC2_sudden_sit",
      "E_used_MPa": 1440,
      "deflection_mm": 3.49,
      "peak_stress_MPa": 29.8
     }
    ],
    "remedy": "Add a full-width foot strip under the front wall and bulkhead (or two extra feet at x=+/-40): seat load then bears directly on the table and this bending case disappears."
   },
   "E6_wall_buckling": {
    "description": "Euler strip buckling per mm width with long-term low modulus. Demand: ~0.5*P(LC2) over 200 mm = 2.45 N/mm on each bearing line.",
    "demand_N_per_mm": 2.45,
    "rows": [
     {
      "t_mm": 2,
      "h_mm": 35,
      "K": 2,
      "case": "carrier apron 35 mm, free-top worst case",
      "material": "SLS_PA12",
      "E_long_low": 528,
      "Pcr_N_per_mm": 0.71
     },
     {
      "t_mm": 2,
      "h_mm": 35,
      "K": 2,
      "case": "carrier apron 35 mm, free-top worst case",
      "material": "SLA_Tough2000V2",
      "E_long_low": 253,
      "Pcr_N_per_mm": 0.34
     },
     {
      "t_mm": 2,
      "h_mm": 35,
      "K": 0.7,
      "case": "apron captured top+bottom",
      "material": "SLS_PA12",
      "E_long_low": 528,
      "Pcr_N_per_mm": 5.79
     },
     {
      "t_mm": 2,
      "h_mm": 35,
      "K": 0.7,
      "case": "apron captured top+bottom",
      "material": "SLA_Tough2000V2",
      "E_long_low": 253,
      "Pcr_N_per_mm": 2.77
     },
     {
      "t_mm": 2,
      "h_mm": 57,
      "K": 1,
      "case": "front bulkhead 57 mm pinned",
      "material": "SLS_PA12",
      "E_long_low": 528,
      "Pcr_N_per_mm": 1.07
     },
     {
      "t_mm": 2,
      "h_mm": 57,
      "K": 1,
      "case": "front bulkhead 57 mm pinned",
      "material": "SLA_Tough2000V2",
      "E_long_low": 253,
      "Pcr_N_per_mm": 0.51
     },
     {
      "t_mm": 2.5,
      "h_mm": 35,
      "K": 2,
      "case": "carrier apron 35 mm, free-top worst case",
      "material": "SLS_PA12",
      "E_long_low": 528,
      "Pcr_N_per_mm": 1.38
     },
     {
      "t_mm": 2.5,
      "h_mm": 35,
      "K": 2,
      "case": "carrier apron 35 mm, free-top worst case",
      "material": "SLA_Tough2000V2",
      "E_long_low": 253,
      "Pcr_N_per_mm": 0.66
     },
     {
      "t_mm": 2.5,
      "h_mm": 35,
      "K": 0.7,
      "case": "apron captured top+bottom",
      "material": "SLS_PA12",
      "E_long_low": 528,
      "Pcr_N_per_mm": 11.3
     },
     {
      "t_mm": 2.5,
      "h_mm": 35,
      "K": 0.7,
      "case": "apron captured top+bottom",
      "material": "SLA_Tough2000V2",
      "E_long_low": 253,
      "Pcr_N_per_mm": 5.42
     },
     {
      "t_mm": 2.5,
      "h_mm": 57,
      "K": 1,
      "case": "front bulkhead 57 mm pinned",
      "material": "SLS_PA12",
      "E_long_low": 528,
      "Pcr_N_per_mm": 2.09
     },
     {
      "t_mm": 2.5,
      "h_mm": 57,
      "K": 1,
      "case": "front bulkhead 57 mm pinned",
      "material": "SLA_Tough2000V2",
      "E_long_low": 253,
      "Pcr_N_per_mm": 1
     },
     {
      "t_mm": 3,
      "h_mm": 35,
      "K": 2,
      "case": "carrier apron 35 mm, free-top worst case",
      "material": "SLS_PA12",
      "E_long_low": 528,
      "Pcr_N_per_mm": 2.39
     },
     {
      "t_mm": 3,
      "h_mm": 35,
      "K": 2,
      "case": "carrier apron 35 mm, free-top worst case",
      "material": "SLA_Tough2000V2",
      "E_long_low": 253,
      "Pcr_N_per_mm": 1.15
     },
     {
      "t_mm": 3,
      "h_mm": 35,
      "K": 0.7,
      "case": "apron captured top+bottom",
      "material": "SLS_PA12",
      "E_long_low": 528,
      "Pcr_N_per_mm": 19.53
     },
     {
      "t_mm": 3,
      "h_mm": 35,
      "K": 0.7,
      "case": "apron captured top+bottom",
      "material": "SLA_Tough2000V2",
      "E_long_low": 253,
      "Pcr_N_per_mm": 9.36
     },
     {
      "t_mm": 3,
      "h_mm": 57,
      "K": 1,
      "case": "front bulkhead 57 mm pinned",
      "material": "SLS_PA12",
      "E_long_low": 528,
      "Pcr_N_per_mm": 3.61
     },
     {
      "t_mm": 3,
      "h_mm": 57,
      "K": 1,
      "case": "front bulkhead 57 mm pinned",
      "material": "SLA_Tough2000V2",
      "E_long_low": 253,
      "Pcr_N_per_mm": 1.73
     },
     {
      "t_mm": 3.5,
      "h_mm": 35,
      "K": 2,
      "case": "carrier apron 35 mm, free-top worst case",
      "material": "SLS_PA12",
      "E_long_low": 528,
      "Pcr_N_per_mm": 3.8
     },
     {
      "t_mm": 3.5,
      "h_mm": 35,
      "K": 2,
      "case": "carrier apron 35 mm, free-top worst case",
      "material": "SLA_Tough2000V2",
      "E_long_low": 253,
      "Pcr_N_per_mm": 1.82
     },
     {
      "t_mm": 3.5,
      "h_mm": 35,
      "K": 0.7,
      "case": "apron captured top+bottom",
      "material": "SLS_PA12",
      "E_long_low": 528,
      "Pcr_N_per_mm": 31.02
     },
     {
      "t_mm": 3.5,
      "h_mm": 35,
      "K": 0.7,
      "case": "apron captured top+bottom",
      "material": "SLA_Tough2000V2",
      "E_long_low": 253,
      "Pcr_N_per_mm": 14.87
     },
     {
      "t_mm": 3.5,
      "h_mm": 57,
      "K": 1,
      "case": "front bulkhead 57 mm pinned",
      "material": "SLS_PA12",
      "E_long_low": 528,
      "Pcr_N_per_mm": 5.73
     },
     {
      "t_mm": 3.5,
      "h_mm": 57,
      "K": 1,
      "case": "front bulkhead 57 mm pinned",
      "material": "SLA_Tough2000V2",
      "E_long_low": 253,
      "Pcr_N_per_mm": 2.75
     }
    ]
   },
   "E7_tipover": {
    "description": "Horizontal force at the top edge (y=310 mm) that lifts the rear/front feet; feet at z=121.4 and -204.9. Vertical loads applied inside the feet footprint cannot tip the unit; anything protruding behind z=-205 (e.g. a rear cover dock used as a step) can.",
    "rows": [
     {
      "unit_mass_kg_ASSUMED": 3,
      "cg_z_mm_ASSUMED": -120,
      "pull_forward_at_top_N": 22.9,
      "push_back_at_top_N": 8.1
     },
     {
      "unit_mass_kg_ASSUMED": 3,
      "cg_z_mm_ASSUMED": -80,
      "pull_forward_at_top_N": 19.1,
      "push_back_at_top_N": 11.9
     },
     {
      "unit_mass_kg_ASSUMED": 3,
      "cg_z_mm_ASSUMED": -40,
      "pull_forward_at_top_N": 15.3,
      "push_back_at_top_N": 15.7
     },
     {
      "unit_mass_kg_ASSUMED": 4.5,
      "cg_z_mm_ASSUMED": -120,
      "pull_forward_at_top_N": 34.4,
      "push_back_at_top_N": 12.1
     },
     {
      "unit_mass_kg_ASSUMED": 4.5,
      "cg_z_mm_ASSUMED": -80,
      "pull_forward_at_top_N": 28.7,
      "push_back_at_top_N": 17.8
     },
     {
      "unit_mass_kg_ASSUMED": 4.5,
      "cg_z_mm_ASSUMED": -40,
      "pull_forward_at_top_N": 23,
      "push_back_at_top_N": 23.5
     },
     {
      "unit_mass_kg_ASSUMED": 6,
      "cg_z_mm_ASSUMED": -120,
      "pull_forward_at_top_N": 45.9,
      "push_back_at_top_N": 16.1
     },
     {
      "unit_mass_kg_ASSUMED": 6,
      "cg_z_mm_ASSUMED": -80,
      "pull_forward_at_top_N": 38.3,
      "push_back_at_top_N": 23.8
     },
     {
      "unit_mass_kg_ASSUMED": 6,
      "cg_z_mm_ASSUMED": -40,
      "pull_forward_at_top_N": 30.7,
      "push_back_at_top_N": 31.4
     }
    ]
   }
  },
  "geometry": {
   "carrier_span_fore_aft_mm": 59.50993254634918,
   "opening_width_mm": 339,
   "deck_y_at_lip_mm": 63.3260804446423,
   "key_top_y_at_center_mm": 39.55875923345692,
   "carrier_rib_depth_available_mm": 17.267321211185383,
   "front_wall_top_y_mm": 25.5,
   "floor_y_mm": 3,
   "keybed_support_bottom_y_mm": 24.32,
   "cavity_rear_z_mm": 60.247151328495036,
   "keyboard_front_z_mm": 81.389164286822,
   "feet_x_mm": [
    -152.5,
    152.5
   ],
   "feet_z_mm": [
    121.39909683317117,
    -204.9402085321777
   ],
   "shell_surface_area_mm2": 919398.5990744667
  },
  "shell_mass_estimates": {
   "basis": "ESTIMATE: thin-shell approximation = rendered outer surface area x wall thickness x part density. The rendered surface includes pocket and bay faces; interior bosses, ribs and chambers are excluded (see structure study JS for element volumes).",
   "area_mm2": 919399,
   "presets": {
    "lightweight": {
     "shell": 2,
     "shell_mass_kg_MJF_PA12": 1.86,
     "shell_mass_kg_SLS_PA12": 1.71
    },
    "balanced": {
     "shell": 2.5,
     "shell_mass_kg_MJF_PA12": 2.32,
     "shell_mass_kg_SLS_PA12": 2.14
    },
    "stiff": {
     "shell": 3,
     "shell_mass_kg_MJF_PA12": 2.79,
     "shell_mass_kg_SLS_PA12": 2.57
    }
   }
  }
 },
 "sustainedLoadImageEstimate": {
  "source": "sources/formlabs_creep_300-6.png",
  "gridline_rows_px": [
   57.5,
   217.5,
   377.5,
   538.5,
   699
  ],
  "n_red": 15,
  "n_blue": 15,
  "y_px_per_pct": 160.5,
  "x0_px": 353.9290364583333,
  "x14_px": 1469.3915662650602,
  "tough2000_v2_red": [
   [
    0,
    0.439
   ],
   [
    0.84,
    0.723
   ],
   [
    1.83,
    0.822
   ],
   [
    2.82,
    0.897
   ],
   [
    3.87,
    0.978
   ],
   [
    4.89,
    1.031
   ],
   [
    5.98,
    1.073
   ],
   [
    7.05,
    1.115
   ],
   [
    7.98,
    1.146
   ],
   [
    9.02,
    1.171
   ],
   [
    9.97,
    1.182
   ],
   [
    10.99,
    1.209
   ],
   [
    11.9,
    1.221
   ],
   [
    12.89,
    1.24
   ],
   [
    14,
    1.264
   ]
  ],
  "tough2000_v11_blue": [
   [
    0.21,
    0.706
   ],
   [
    0.82,
    0.904
   ],
   [
    1.85,
    1.142
   ],
   [
    2.87,
    1.304
   ],
   [
    3.88,
    1.452
   ],
   [
    4.86,
    1.544
   ],
   [
    5.9,
    1.661
   ],
   [
    6.79,
    1.734
   ],
   [
    7.89,
    1.844
   ],
   [
    8.94,
    1.913
   ],
   [
    9.99,
    1.949
   ],
   [
    10.9,
    1.984
   ],
   [
    11.99,
    2.025
   ],
   [
    13.05,
    2.062
   ],
   [
    14,
    2.099
   ]
  ],
  "summary": {
   "stress_MPa": 4,
   "strain_first_pct": 0.439,
   "strain_14d_pct": 1.264,
   "apparent_modulus_14d_MPa": 316,
   "ratio_to_flexural_modulus_1701": 0.186,
   "elastic_strain_expected_pct_at_1701MPa": 0.235,
   "classification": "image estimate from vendor graph; +/-0.05 % strain reading uncertainty assumed"
  }
 },
 "childMassBasis": {
  "source_url": "https://www.cdc.gov/growthcharts/data/zscore/wtage.csv",
  "accessed": "2026-11-05",
  "dataset": "CDC 2000 growth charts, weight-for-age (kg), percentiles P3..P97",
  "design_basis": {
   "boys_p95_126_5mo": 49.29525914,
   "girls_p95_126_5mo": 51.54317357,
   "boys_p50_126_5mo": 34.00363017,
   "girls_p50_126_5mo": 35.19176177,
   "boys_p95_102_5mo": 37.73326669,
   "girls_p95_102_5mo": 38.91658465
  },
  "note": "126.5 months = age 10.5 y. 50 kg design child chosen as ~95th percentile at 10.5 y; not an upper bound for older children or adults."
 },
 "structureStudy": {
  "presets": [
   {
    "preset": "lightweight",
    "frame_cm3": 243.3,
    "frame_g": 246,
    "shell_cm3": 1839,
    "shell_g": 1857,
    "total_g": 2103,
    "clashes": 0,
    "parameters": {
     "shell": 2,
     "ribT": 1.6,
     "ribPitch": 40,
     "ribDepthUsed": 16,
     "bulkheadT": 2,
     "crossbar": [
      10,
      7
     ],
     "crossbarZ": [
      68,
      96
     ],
     "trayT": 2,
     "drillPadSize": 12,
     "drillPadRows": 2,
     "drillPadCols": 5,
     "shimGap": 1,
     "rearRibs": 2,
     "seatLid": false
    }
   },
   {
    "preset": "balanced",
    "frame_cm3": 361.3,
    "frame_g": 365,
    "shell_cm3": 2298,
    "shell_g": 2321,
    "total_g": 2686,
    "clashes": 0,
    "parameters": {
     "shell": 2.5,
     "ribT": 2,
     "ribPitch": 25,
     "ribDepthUsed": 16,
     "bulkheadT": 2.5,
     "crossbar": [
      12,
      7
     ],
     "crossbarZ": [
      68,
      96
     ],
     "trayT": 2.5,
     "drillPadSize": 14,
     "drillPadRows": 2,
     "drillPadCols": 5,
     "shimGap": 1,
     "rearRibs": 4,
     "seatLid": false
    }
   },
   {
    "preset": "stiff",
    "frame_cm3": 441.4,
    "frame_g": 446,
    "shell_cm3": 2758,
    "shell_g": 2786,
    "total_g": 3232,
    "clashes": 0,
    "parameters": {
     "shell": 3,
     "ribT": 2.4,
     "ribPitch": 20,
     "ribDepthUsed": 15.6,
     "bulkheadT": 3,
     "crossbar": [
      14,
      8
     ],
     "crossbarZ": [
      68,
      96
     ],
     "trayT": 3,
     "drillPadSize": 16,
     "drillPadRows": 2,
     "drillPadCols": 5,
     "shimGap": 1,
     "rearRibs": 6,
     "seatLid": false
    }
   }
  ],
  "withSeatLid": [
   {
    "preset": "lightweight",
    "frame_g_with_lid": 551,
    "lid_g": 305.3
   },
   {
    "preset": "balanced",
    "frame_g_with_lid": 670,
    "lid_g": 305.3
   },
   {
    "preset": "stiff",
    "frame_g_with_lid": 751,
    "lid_g": 305.3
   }
  ],
  "balancedElements": [
   {
    "name": "Front bulkhead (fixed, rear of music bay)",
    "kind": "bulkhead",
    "removable": false,
    "pieces": 5,
    "volume_cm3": 45.81,
    "mass_g": 46.3,
    "note": "Carries deck lip and carrier rear-ledge load straight to the floor; cable windows at floor level."
   },
   {
    "name": "Deck-lip ribs (fixed)",
    "kind": "rib",
    "removable": false,
    "pieces": 12,
    "volume_cm3": 7.73,
    "mass_g": 7.8,
    "note": "Depth 16.0 mm, bottom >= 3 mm above resting key tops."
   },
   {
    "name": "Carrier bearing lands and ledges (fixed)",
    "kind": "ledge",
    "removable": false,
    "pieces": 6,
    "volume_cm3": 7.41,
    "mass_g": 7.5,
    "note": "Flat, thickened lands: rear lip step, front-wall top, wing tops, rail tops. Keep >=3 mm wall below each land."
   },
   {
    "name": "Under-keybed crossbar 1 (split, detachable)",
    "kind": "crossbar",
    "removable": true,
    "pieces": 4,
    "volume_cm3": 29.4,
    "mass_g": 29.7,
    "note": "Halves drop in through the open bay (carrier and keybed out), slide outward into blind side-wall pockets, then lap-bolt at x=11. Top at y=11.5, below the tray/keybed stack."
   },
   {
    "name": "Crossbar 1 side bosses (fixed)",
    "kind": "boss",
    "removable": false,
    "pieces": 2,
    "volume_cm3": 2.88,
    "mass_g": 2.9,
    "note": "Pockets in the side walls / wing walls receive the bar ends; one horizontal fastener each."
   },
   {
    "name": "Under-keybed crossbar 2 (split, detachable)",
    "kind": "crossbar",
    "removable": true,
    "pieces": 4,
    "volume_cm3": 24.38,
    "mass_g": 24.6,
    "note": "Halves drop vertically into open-top saddles on the wing walls (no outward slide: wood-wheel cradles), then lap-bolt at x=11. Top at y=11.5, below the tray/keybed stack."
   },
   {
    "name": "Crossbar 2 side bosses (fixed)",
    "kind": "boss",
    "removable": false,
    "pieces": 2,
    "volume_cm3": 2.88,
    "mass_g": 2.9,
    "note": "Pockets in the side walls / wing walls receive the bar ends; one horizontal fastener each."
   },
   {
    "name": "Keybed backing tray (removable)",
    "kind": "tray",
    "removable": true,
    "pieces": 9,
    "volume_cm3": 53.18,
    "mass_g": 53.7,
    "note": "Lowered through the bay, then slid rearward with the keybed by the underlap. Notched around jack/rocker keep-outs."
   },
   {
    "name": "Drillable sacrificial pads (solid, on tray)",
    "kind": "pad",
    "removable": true,
    "pieces": 8,
    "volume_cm3": 14.62,
    "mass_g": 14.8,
    "note": "Solid 14 mm pads, top 1 mm below the keybed support for shims. NOT keybed screw locations: drill/insert only after measuring the bare SE25."
   },
   {
    "name": "Rear lower crossbar (split, detachable)",
    "kind": "crossbar",
    "removable": true,
    "pieces": 2,
    "volume_cm3": 50.11,
    "mass_g": 50.6,
    "note": "Below the speaker chambers (y<20); ties the rear corners and backs the rear foot line."
   },
   {
    "name": "Rear upper crossbar (split, detachable)",
    "kind": "crossbar",
    "removable": true,
    "pieces": 2,
    "volume_cm3": 45.94,
    "mass_g": 46.4,
    "note": "Above chambers and the volume-wheel stack, behind the display keep-out; resists racking of the tall upper body. Install from the bottom service opening with the display out."
   },
   {
    "name": "Upper crossbar corner gussets (fixed)",
    "kind": "gusset",
    "removable": false,
    "pieces": 2,
    "volume_cm3": 0.81,
    "mass_g": 0.8,
    "note": "Side wall to crossbar."
   },
   {
    "name": "Rear-wall vertical ribs (fixed)",
    "kind": "rib",
    "removable": false,
    "pieces": 56,
    "volume_cm3": 21.72,
    "mass_g": 21.9,
    "note": "Follow the forward-leaning rear wall; shallower where the sealed chambers sit close to the wall."
   },
   {
    "name": "Rear dock backer pads (fixed)",
    "kind": "pad",
    "removable": false,
    "pieces": 4,
    "volume_cm3": 41.6,
    "mass_g": 42,
    "note": "Solid backing where the root rear-cover dock hooks land; loads go into the vertical ribs, not the thin wall."
   },
   {
    "name": "Floor gussets (fixed)",
    "kind": "gusset",
    "removable": false,
    "pieces": 10,
    "volume_cm3": 2.02,
    "mass_g": 2,
    "note": "Bulkhead-to-floor (rear face only, away from the keybed) and side-wall-to-floor between chambers and wall."
   },
   {
    "name": "Full-width foot strips (TPU/rubber)",
    "kind": "foot",
    "removable": false,
    "pieces": 2,
    "volume_cm3": 10.86,
    "mass_g": 11,
    "note": "Under the front wall and bulkhead lines. First-order: corner-feet-only floor bending reaches ~30 MPa for LC2; strips remove that path."
   }
  ],
  "assemblyPaths": [
   "Carrier off -> lift keybed+tray out (reverse of: lower into bay, slide rearward by the 39 mm underlap region, seat on pads).",
   "Under-keybed crossbars: each half drops into the bay, slides outward into its side boss, lap-bolts at the split line; no part passes over the keys.",
   "Rear crossbars: through the bottom service opening (or the display aperture with the display removed); halves join at the split line.",
   "Rear dock (root): hooks must land on the dock backer pads; keep the docked carrier inside the rear foot line."
  ]
 },
 "validation": {
  "generated": "2026-11-05T08:45:18.907Z",
  "viewerShots": {
   "structure-balanced-iso": {
    "clashes": 0,
    "mode": "installed",
    "frame_g": 365
   },
   "structure-balanced-keepouts": {
    "clashes": 0,
    "mode": "installed",
    "frame_g": 365
   },
   "structure-bay-closeup": {
    "clashes": 0,
    "mode": "installed",
    "frame_g": 365
   },
   "structure-bay-side": {
    "clashes": 0,
    "mode": "installed",
    "frame_g": 365
   },
   "structure-explode": {
    "clashes": 0,
    "mode": "assembly path (keybed and display removed)",
    "frame_g": 371
   },
   "structure-rear-upper": {
    "clashes": 0,
    "mode": "installed",
    "frame_g": 365
   },
   "structure-under": {
    "clashes": 0,
    "mode": "installed",
    "frame_g": 446
   },
   "structure-lightweight": {
    "clashes": 0,
    "mode": "installed",
    "frame_g": 246
   },
   "structure-stiff-lid": {
    "clashes": 0,
    "mode": "installed",
    "frame_g": 751
   }
  },
  "live": [
   {
    "case": "current defaults",
    "set": {},
    "results": {
     "lightweight": {
      "clashes": [],
      "frame_g": 246,
      "shell_g": 1857,
      "ribDepth": 16
     },
     "balanced": {
      "clashes": [],
      "frame_g": 365,
      "shell_g": 2321,
      "ribDepth": 16
     },
     "stiff": {
      "clashes": [],
      "frame_g": 446,
      "shell_g": 2786,
      "ribDepth": 15.6
     }
    },
    "keepouts": [
     {
      "name": "Keep-out: Key tails under typing deck (+2 mm)",
      "min": [
       -134.1,
       24.3,
       61.7
      ],
      "max": [
       156.1,
       43.7,
       81.4
      ]
     },
     {
      "name": "Keep-out: Open key travel and finger zone (carrier removed)",
      "min": [
       -134.1,
       24.3,
       81.4
      ],
      "max": [
       156.1,
       68.4,
       140.4
      ]
     },
     {
      "name": "Keep-out: Button cluster (left wing)",
      "min": [
       -155,
       35.8,
       75.4
      ],
      "max": [
       -138,
       40.3,
       116.5
      ]
     },
     {
      "name": "Keep-out: Left wood wheel sweep + cradle",
      "min": [
       -169.5,
       11,
       80
      ],
      "max": [
       -150,
       45,
       117
      ]
     },
     {
      "name": "Keep-out: Right wood wheel sweep + cradle",
      "min": [
       156.1,
       11,
       80
      ],
      "max": [
       175,
       45,
       117
      ]
     },
     {
      "name": "Keep-out: 3.5 mm headset jack + wiring",
      "min": [
       -146.5,
       12.5,
       116.9
      ],
      "max": [
       -134.5,
       22.5,
       140.9
      ]
     },
     {
      "name": "Keep-out: 6.35 mm jack + wiring",
      "min": [
       -129.6,
       6,
       105.9
      ],
      "max": [
       -111.4,
       25.6,
       140.9
      ]
     },
     {
      "name": "Keep-out: Power rocker + terminals",
      "min": [
       120.5,
       11.5,
       122.9
      ],
      "max": [
       140.5,
       23.5,
       140.9
      ]
     },
     {
      "name": "Keep-out: Volume wheel, yoke and encoder stack (catalog EM14 stack, encoder above wheel)",
      "min": [
       126.5,
       209,
       -196.4
      ],
      "max": [
       177,
       273,
       -142.4
      ]
     },
     {
      "name": "Keep-out: Display module (glass + panel + driver, ASSUMED 22 mm deep)",
      "min": [
       -117.8,
       140.4,
       -160.3
      ],
      "max": [
       117.8,
       301.6,
       -107.1
      ]
     },
     {
      "name": "Keep-out: Left sealed speaker chamber",
      "min": [
       -160,
       20,
       -218.4
      ],
      "max": [
       -75,
       240,
       -143.4
      ]
     },
     {
      "name": "Keep-out: Right sealed speaker chamber",
      "min": [
       75,
       20,
       -218.4
      ],
      "max": [
       160,
       240,
       -143.4
      ]
     },
     {
      "name": "Keep-out: Left driver",
      "min": [
       -174.5,
       129,
       -192
      ],
      "max": [
       -126.5,
       193,
       -128
      ]
     },
     {
      "name": "Keep-out: Right driver",
      "min": [
       126.5,
       129,
       -192
      ],
      "max": [
       174.5,
       193,
       -128
      ]
     },
     {
      "name": "Keep-out: Host electronics, battery, ballast (ASSUMED zone)",
      "min": [
       -112,
       5,
       -140
      ],
      "max": [
       112,
       46,
       -24
      ]
     }
    ],
    "cameraUnchangedByStudy": true,
    "cameraUnchangedByParams": true,
    "hasCameraGlobal": false,
    "paramsUsed": {
     "width": 355,
     "midioverlap": 39,
     "mididrop": 18,
     "controlheight": 17.5,
     "controljackgap": 20,
     "controlwheeloffsetY": 0
    }
   },
   {
    "case": "wider 400 mm",
    "set": {
     "width": 400
    },
    "results": {
     "lightweight": {
      "clashes": [],
      "frame_g": 264,
      "shell_g": 1857,
      "ribDepth": 16
     },
     "balanced": {
      "clashes": [],
      "frame_g": 394,
      "shell_g": 2321,
      "ribDepth": 16
     },
     "stiff": {
      "clashes": [],
      "frame_g": 481,
      "shell_g": 2786,
      "ribDepth": 15.6
     }
    },
    "keepouts": [
     {
      "name": "Keep-out: Key tails under typing deck (+2 mm)",
      "min": [
       -134.1,
       24.3,
       61.7
      ],
      "max": [
       156.1,
       43.7,
       81.4
      ]
     },
     {
      "name": "Keep-out: Open key travel and finger zone (carrier removed)",
      "min": [
       -134.1,
       24.3,
       81.4
      ],
      "max": [
       156.1,
       68.4,
       140.4
      ]
     },
     {
      "name": "Keep-out: Button cluster (left wing)",
      "min": [
       -155,
       35.8,
       75.4
      ],
      "max": [
       -138,
       40.3,
       116.5
      ]
     },
     {
      "name": "Keep-out: Left wood wheel sweep + cradle",
      "min": [
       -192,
       11,
       80
      ],
      "max": [
       -150,
       45,
       117
      ]
     },
     {
      "name": "Keep-out: Right wood wheel sweep + cradle",
      "min": [
       156.1,
       11,
       80
      ],
      "max": [
       197.5,
       45,
       117
      ]
     },
     {
      "name": "Keep-out: 3.5 mm headset jack + wiring",
      "min": [
       -169,
       12.5,
       116.9
      ],
      "max": [
       -157,
       22.5,
       140.9
      ]
     },
     {
      "name": "Keep-out: 6.35 mm jack + wiring",
      "min": [
       -152.1,
       6,
       105.9
      ],
      "max": [
       -133.9,
       25.6,
       140.9
      ]
     },
     {
      "name": "Keep-out: Power rocker + terminals",
      "min": [
       143,
       11.5,
       122.9
      ],
      "max": [
       163,
       23.5,
       140.9
      ]
     },
     {
      "name": "Keep-out: Volume wheel, yoke and encoder stack (catalog EM14 stack, encoder above wheel)",
      "min": [
       149,
       209,
       -196.4
      ],
      "max": [
       199.5,
       273,
       -142.4
      ]
     },
     {
      "name": "Keep-out: Display module (glass + panel + driver, ASSUMED 22 mm deep)",
      "min": [
       -117.8,
       140.4,
       -160.3
      ],
      "max": [
       117.8,
       301.6,
       -107.1
      ]
     },
     {
      "name": "Keep-out: Left sealed speaker chamber",
      "min": [
       -160,
       20,
       -218.4
      ],
      "max": [
       -75,
       240,
       -143.4
      ]
     },
     {
      "name": "Keep-out: Right sealed speaker chamber",
      "min": [
       75,
       20,
       -218.4
      ],
      "max": [
       160,
       240,
       -143.4
      ]
     },
     {
      "name": "Keep-out: Left driver",
      "min": [
       -174.5,
       129,
       -192
      ],
      "max": [
       -126.5,
       193,
       -128
      ]
     },
     {
      "name": "Keep-out: Right driver",
      "min": [
       126.5,
       129,
       -192
      ],
      "max": [
       174.5,
       193,
       -128
      ]
     },
     {
      "name": "Keep-out: Host electronics, battery, ballast (ASSUMED zone)",
      "min": [
       -112,
       5,
       -140
      ],
      "max": [
       112,
       46,
       -24
      ]
     }
    ],
    "cameraUnchangedByStudy": true,
    "cameraUnchangedByParams": true,
    "hasCameraGlobal": false,
    "paramsUsed": {
     "width": 400,
     "midioverlap": 39,
     "mididrop": 18,
     "controlheight": 17.5,
     "controljackgap": 20,
     "controlwheeloffsetY": 0
    }
   },
   {
    "case": "jack spacing 26, control height 15",
    "set": {
     "controljackgap": 26,
     "controlheight": 15
    },
    "results": {
     "lightweight": {
      "clashes": [],
      "frame_g": 246,
      "shell_g": 1857,
      "ribDepth": 16
     },
     "balanced": {
      "clashes": [],
      "frame_g": 365,
      "shell_g": 2321,
      "ribDepth": 16
     },
     "stiff": {
      "clashes": [],
      "frame_g": 446,
      "shell_g": 2786,
      "ribDepth": 15.6
     }
    },
    "keepouts": [
     {
      "name": "Keep-out: Key tails under typing deck (+2 mm)",
      "min": [
       -134.1,
       24.3,
       61.7
      ],
      "max": [
       156.1,
       43.7,
       81.4
      ]
     },
     {
      "name": "Keep-out: Open key travel and finger zone (carrier removed)",
      "min": [
       -134.1,
       24.3,
       81.4
      ],
      "max": [
       156.1,
       68.4,
       140.4
      ]
     },
     {
      "name": "Keep-out: Button cluster (left wing)",
      "min": [
       -155,
       35.8,
       75.4
      ],
      "max": [
       -138,
       40.3,
       116.5
      ]
     },
     {
      "name": "Keep-out: Left wood wheel sweep + cradle",
      "min": [
       -169.5,
       11,
       80
      ],
      "max": [
       -150,
       45,
       117
      ]
     },
     {
      "name": "Keep-out: Right wood wheel sweep + cradle",
      "min": [
       156.1,
       11,
       80
      ],
      "max": [
       175,
       45,
       117
      ]
     },
     {
      "name": "Keep-out: 3.5 mm headset jack + wiring",
      "min": [
       -149.5,
       10,
       116.9
      ],
      "max": [
       -137.5,
       20,
       140.9
      ]
     },
     {
      "name": "Keep-out: 6.35 mm jack + wiring",
      "min": [
       -126.6,
       3.5,
       105.9
      ],
      "max": [
       -108.4,
       23.1,
       140.9
      ]
     },
     {
      "name": "Keep-out: Power rocker + terminals",
      "min": [
       120.5,
       9,
       122.9
      ],
      "max": [
       140.5,
       21,
       140.9
      ]
     },
     {
      "name": "Keep-out: Volume wheel, yoke and encoder stack (catalog EM14 stack, encoder above wheel)",
      "min": [
       126.5,
       209,
       -196.4
      ],
      "max": [
       177,
       273,
       -142.4
      ]
     },
     {
      "name": "Keep-out: Display module (glass + panel + driver, ASSUMED 22 mm deep)",
      "min": [
       -117.8,
       140.4,
       -160.3
      ],
      "max": [
       117.8,
       301.6,
       -107.1
      ]
     },
     {
      "name": "Keep-out: Left sealed speaker chamber",
      "min": [
       -160,
       20,
       -218.4
      ],
      "max": [
       -75,
       240,
       -143.4
      ]
     },
     {
      "name": "Keep-out: Right sealed speaker chamber",
      "min": [
       75,
       20,
       -218.4
      ],
      "max": [
       160,
       240,
       -143.4
      ]
     },
     {
      "name": "Keep-out: Left driver",
      "min": [
       -174.5,
       129,
       -192
      ],
      "max": [
       -126.5,
       193,
       -128
      ]
     },
     {
      "name": "Keep-out: Right driver",
      "min": [
       126.5,
       129,
       -192
      ],
      "max": [
       174.5,
       193,
       -128
      ]
     },
     {
      "name": "Keep-out: Host electronics, battery, ballast (ASSUMED zone)",
      "min": [
       -112,
       5,
       -140
      ],
      "max": [
       112,
       46,
       -24
      ]
     }
    ],
    "cameraUnchangedByStudy": true,
    "cameraUnchangedByParams": true,
    "hasCameraGlobal": false,
    "paramsUsed": {
     "width": 355,
     "midioverlap": 39,
     "mididrop": 18,
     "controlheight": 15,
     "controljackgap": 26,
     "controlwheeloffsetY": 0
    }
   },
   {
    "case": "wheel up 30 mm",
    "set": {
     "controlwheeloffsetY": 30
    },
    "results": {
     "lightweight": {
      "clashes": [],
      "frame_g": 246,
      "shell_g": 1857,
      "ribDepth": 16
     },
     "balanced": {
      "clashes": [],
      "frame_g": 358,
      "shell_g": 2321,
      "ribDepth": 16
     },
     "stiff": {
      "clashes": [],
      "frame_g": 437,
      "shell_g": 2786,
      "ribDepth": 15.6
     }
    },
    "keepouts": [
     {
      "name": "Keep-out: Key tails under typing deck (+2 mm)",
      "min": [
       -134.1,
       24.3,
       61.7
      ],
      "max": [
       156.1,
       43.7,
       81.4
      ]
     },
     {
      "name": "Keep-out: Open key travel and finger zone (carrier removed)",
      "min": [
       -134.1,
       24.3,
       81.4
      ],
      "max": [
       156.1,
       68.4,
       140.4
      ]
     },
     {
      "name": "Keep-out: Button cluster (left wing)",
      "min": [
       -155,
       35.8,
       75.4
      ],
      "max": [
       -138,
       40.3,
       116.5
      ]
     },
     {
      "name": "Keep-out: Left wood wheel sweep + cradle",
      "min": [
       -169.5,
       11,
       80
      ],
      "max": [
       -150,
       45,
       117
      ]
     },
     {
      "name": "Keep-out: Right wood wheel sweep + cradle",
      "min": [
       156.1,
       11,
       80
      ],
      "max": [
       175,
       45,
       117
      ]
     },
     {
      "name": "Keep-out: 3.5 mm headset jack + wiring",
      "min": [
       -146.5,
       12.5,
       116.9
      ],
      "max": [
       -134.5,
       22.5,
       140.9
      ]
     },
     {
      "name": "Keep-out: 6.35 mm jack + wiring",
      "min": [
       -129.6,
       6,
       105.9
      ],
      "max": [
       -111.4,
       25.6,
       140.9
      ]
     },
     {
      "name": "Keep-out: Power rocker + terminals",
      "min": [
       120.5,
       11.5,
       122.9
      ],
      "max": [
       140.5,
       23.5,
       140.9
      ]
     },
     {
      "name": "Keep-out: Volume wheel, yoke and encoder stack (catalog EM14 stack, encoder above wheel)",
      "min": [
       126.5,
       239,
       -197.7
      ],
      "max": [
       177,
       303,
       -143.7
      ]
     },
     {
      "name": "Keep-out: Display module (glass + panel + driver, ASSUMED 22 mm deep)",
      "min": [
       -117.8,
       140.4,
       -160.3
      ],
      "max": [
       117.8,
       301.6,
       -107.1
      ]
     },
     {
      "name": "Keep-out: Left sealed speaker chamber",
      "min": [
       -160,
       20,
       -218.4
      ],
      "max": [
       -75,
       240,
       -143.4
      ]
     },
     {
      "name": "Keep-out: Right sealed speaker chamber",
      "min": [
       75,
       20,
       -218.4
      ],
      "max": [
       160,
       240,
       -143.4
      ]
     },
     {
      "name": "Keep-out: Left driver",
      "min": [
       -174.5,
       129,
       -192
      ],
      "max": [
       -126.5,
       193,
       -128
      ]
     },
     {
      "name": "Keep-out: Right driver",
      "min": [
       126.5,
       129,
       -192
      ],
      "max": [
       174.5,
       193,
       -128
      ]
     },
     {
      "name": "Keep-out: Host electronics, battery, ballast (ASSUMED zone)",
      "min": [
       -112,
       5,
       -140
      ],
      "max": [
       112,
       46,
       -24
      ]
     }
    ],
    "cameraUnchangedByStudy": true,
    "cameraUnchangedByParams": true,
    "hasCameraGlobal": false,
    "paramsUsed": {
     "width": 355,
     "midioverlap": 39,
     "mididrop": 18,
     "controlheight": 17.5,
     "controljackgap": 20,
     "controlwheeloffsetY": 30
    }
   },
   {
    "case": "underlap 30, drop 22",
    "set": {
     "midioverlap": 30,
     "mididrop": 22
    },
    "results": {
     "lightweight": {
      "clashes": [],
      "frame_g": 238,
      "shell_g": 1857,
      "ribDepth": 16
     },
     "balanced": {
      "clashes": [],
      "frame_g": 354,
      "shell_g": 2321,
      "ribDepth": 16
     },
     "stiff": {
      "clashes": [],
      "frame_g": 431,
      "shell_g": 2786,
      "ribDepth": 16
     }
    },
    "keepouts": [
     {
      "name": "Keep-out: Key tails under typing deck (+2 mm)",
      "min": [
       -134.1,
       19.7,
       70.7
      ],
      "max": [
       156.1,
       39,
       81.4
      ]
     },
     {
      "name": "Keep-out: Open key travel and finger zone (carrier removed)",
      "min": [
       -134.1,
       19.7,
       81.4
      ],
      "max": [
       156.1,
       68.4,
       149.4
      ]
     },
     {
      "name": "Keep-out: Button cluster (left wing)",
      "min": [
       -155,
       35.8,
       75.4
      ],
      "max": [
       -138,
       40.3,
       116.5
      ]
     },
     {
      "name": "Keep-out: Left wood wheel sweep + cradle",
      "min": [
       -169.5,
       6.4,
       80
      ],
      "max": [
       -150,
       40.4,
       117
      ]
     },
     {
      "name": "Keep-out: Right wood wheel sweep + cradle",
      "min": [
       156.1,
       6.4,
       80
      ],
      "max": [
       175,
       40.4,
       117
      ]
     },
     {
      "name": "Keep-out: 3.5 mm headset jack + wiring",
      "min": [
       -146.5,
       12.5,
       125.9
      ],
      "max": [
       -134.5,
       22.5,
       149.9
      ]
     },
     {
      "name": "Keep-out: 6.35 mm jack + wiring",
      "min": [
       -129.6,
       6,
       114.9
      ],
      "max": [
       -111.4,
       25.6,
       149.9
      ]
     },
     {
      "name": "Keep-out: Power rocker + terminals",
      "min": [
       120.5,
       11.5,
       131.9
      ],
      "max": [
       140.5,
       23.5,
       149.9
      ]
     },
     {
      "name": "Keep-out: Volume wheel, yoke and encoder stack (catalog EM14 stack, encoder above wheel)",
      "min": [
       126.5,
       209,
       -196.4
      ],
      "max": [
       177,
       273,
       -142.4
      ]
     },
     {
      "name": "Keep-out: Display module (glass + panel + driver, ASSUMED 22 mm deep)",
      "min": [
       -117.8,
       140.4,
       -160.3
      ],
      "max": [
       117.8,
       301.6,
       -107.1
      ]
     },
     {
      "name": "Keep-out: Left sealed speaker chamber",
      "min": [
       -160,
       20,
       -218.4
      ],
      "max": [
       -75,
       240,
       -143.4
      ]
     },
     {
      "name": "Keep-out: Right sealed speaker chamber",
      "min": [
       75,
       20,
       -218.4
      ],
      "max": [
       160,
       240,
       -143.4
      ]
     },
     {
      "name": "Keep-out: Left driver",
      "min": [
       -174.5,
       129,
       -192
      ],
      "max": [
       -126.5,
       193,
       -128
      ]
     },
     {
      "name": "Keep-out: Right driver",
      "min": [
       126.5,
       129,
       -192
      ],
      "max": [
       174.5,
       193,
       -128
      ]
     },
     {
      "name": "Keep-out: Host electronics, battery, ballast (ASSUMED zone)",
      "min": [
       -112,
       5,
       -140
      ],
      "max": [
       112,
       46,
       -24
      ]
     }
    ],
    "cameraUnchangedByStudy": true,
    "cameraUnchangedByParams": true,
    "hasCameraGlobal": false,
    "paramsUsed": {
     "width": 355,
     "midioverlap": 30,
     "mididrop": 22,
     "controlheight": 17.5,
     "controljackgap": 20,
     "controlwheeloffsetY": 0
    }
   }
  ],
  "errors": []
 },
 "fitFindings": [
  {
   "item": "6.35 mm Neutrik NMJ6HCD2 at the current 17.5 mm axis",
   "finding": "Body top at y=25.64 mm vs the provisional keybed support bottom at 24.32 mm: 1.3 mm interference over x -129.6..-111.4 (z 105.9..140.9). Also 0.14 mm above the 25.5 mm front-wall top.",
   "action": "Lower the axis to <=16 mm (body bottom then at ~4.5, on a 1.6 mm PCB at ~2.9: tight to the floor) or rotate the jack board, or use the SJ-435107RS-height class for 3.5 mm and move the 6.35 mm socket outside the keybed footprint. Re-check after measuring the bare SE25.",
   "severity": "blocking until measured"
  },
  {
   "item": "NMJ6HCD2 ferrule vs 2.5 mm pocket",
   "finding": "STEP envelope shows ~4.3 mm of ferrule ahead of the body reference; with a 2.5 mm recess it would stand ~1.8 mm proud (STEP origin interpretation unverified).",
   "action": "Pocket depth >=5 mm, or NMJ6HHD2/half-thread variant with a recessed nut; verify against the STEP in CAD.",
   "severity": "appearance/fit"
  },
  {
   "item": "NMJ6HFD2 nut",
   "finding": "15 A/F nut (17.3 mm across corners, 4.75 thick) cannot fit the 14 mm-tall pocket.",
   "action": "Use NMJ6HCD2, or enlarge the pocket to >=19 mm tall and >=5.5 mm deep.",
   "severity": "choice"
  },
  {
   "item": "C&K 7101 J1 rocker",
   "finding": "Rear-panel bracket needs two documented Ø2.39 mm holes 23.80 mm apart behind a 17.96 x 10.62 cut-out; the 26 x 14 pocket floor works as that panel only if it is a flat 30 x 11+ mm plate up to 3.18 mm thick. Actuator projects 7.87 mm, so the bracket must sit ~5.4 mm behind the pocket face for a recessed look (assumed).",
   "action": "Model a flat pocket-floor plate with the two holes; or use NKK M2012 bracket PCB mount (no exposed screws).",
   "severity": "design detail"
  },
  {
   "item": "Volume wheel stack (vertical axle)",
   "finding": "Catalog stack heights: EM14 59 mm, PEC11L 53.5 mm, AS5600 31 mm. The current site reservation spans only y 196..218 (22 mm) beside a 10 mm wheel.",
   "action": "Reserve ~60 mm vertical stack (y ~190..232 for EM14) or use the magnetic option; yoke spine must sit inboard of the 50 mm wheel; shaft loads go to two SKF 625-2Z.",
   "severity": "reservation update"
  },
  {
   "item": "Volume encoder below the wheel",
   "finding": "With the EM14 stack hanging below the wheel (wheel centre 47.5 mm above the stack bottom) the encoder would reach y~173 at x 146..161, z -177..-162, inside the right side-firing driver reservation (x 126.5..174.5, y 129..193).",
   "action": "Mount the encoder above the wheel (catalog default encoderAbove: true, stack y ~209..273 incl. pins) or use the 31 mm magnetic stack. The upper rear crossbar moves above it automatically.",
   "severity": "reservation update"
  },
  {
   "item": "Right wood modulation wheel",
   "finding": "Bearing-cheek-wheel-cheek-sensor stack with 623-2Z and Bourns 3382H is 19.5 mm; the right band between the key opening (x=156.1) and a 2 mm outer skin (x=175.5) is 19.4 mm. Left band is ample. Magnetic end sensing needs 22.1 mm.",
   "action": "Zero margin on the right: shift the keybed ~3 mm left, use a smaller bearing class (maker not verified here), or an overhung single-cheek wheel. Do not shave the outer rail below 2 mm.",
   "severity": "blocking for the right wheel"
  },
  {
   "item": "Wood wheel 28 x 4 mm",
   "finding": "Solid 4 mm wood across 28 mm is fragile across the grain and cannot hold a bearing fit.",
   "action": "Laminated hardwood or veneer ring on a metal/printed hub with a D-bore; friction via O-ring or wave washer; printed travel stops. Custom part.",
   "severity": "custom"
  },
  {
   "item": "Seat load on the current Model M",
   "finding": "No surface of the current geometry can take a seated child without loading keys or the display: the 62 mm carrier is too shallow for a seat and a child would also load the typing keyboard.",
   "action": "Do not market or allow sitting. If required, design the optional torsion-box lid, add foot strips, and run the physical test plan; tip-over must be solved first.",
   "severity": "safety"
  },
  {
   "item": "Tip-over",
   "finding": "With an ASSUMED 4.5 kg unit and CG at z=-80 mm, ~29 N pulling forward or ~18 N pushing back at the top edge lifts the feet (rigid-body estimate).",
   "action": "Low/forward ballast, wider rear feet, optional tether point; the rear dock must not protrude behind the rear foot line or be usable as a step.",
   "severity": "safety"
  }
 ],
 "physicalTestPlan": [
  "Coupons: print tensile/flexural bars in XY and Z for the chosen process and colour; condition them (PA12 absorbs moisture); measure E and strength. Replace the ASSUMED 0.4-0.6 PA12 creep factor with a 7-14 day flexural creep test at 2-4 MPa.",
  "Sub-assembly stiffness: load the carrier, lid (if built) and front bay through a 200 x 150 mm foam-faced pad in 50 N steps to 1.5 x LC2 (~1.5 kN), dial gauges at mid-span and over the keys; record hysteresis and any key/keybed contact.",
  "Sustained load: hold LC1 (490 N) for 24 h at 23 C and again at 35 C; measure creep and recovery after 24 h unloaded.",
  "Impact: drop a 50 kg sandbag (or a calibrated drop rig) from 50 mm and 100 mm onto the seat area with an accelerometer; inspect with dye penetrant or under light for whitening/cracks; repeat x100 for fatigue.",
  "Knee/foot: 981 N through a 50 mm diameter pad at the worst span centre; look for local punching and skin-rib debonding.",
  "Tip-over: measure the horizontal force at the top edge to lift each foot with the finished mass; compare to the relevant toy/furniture stability clauses selected by a compliance engineer.",
  "Fasteners/inserts: pull-out and torque-out tests for heat-set inserts in the drill pads and crossbar bosses in the actual printed material.",
  "Only after these: decide whether any seating claim is made; involve a qualified compliance lab. This study does not certify anything."
 ],
 "rearDockAdvice": [
  "Hang the stored carrier on two hooks that land on the dock backer pads at x = +/-60 mm (y 70..110 and 180..220 in this study); the pads tie into the vertical rear ribs so the thin rear wall is not peeled.",
  "Keep the docked carrier inside the rear foot line (z >= -205 mm at the base): anything behind it becomes a lever that tips the unit backward if a child steps or leans on it.",
  "Rear vents run across y ~ top-25..top-60: keep the dock below them or leave a >=8 mm air gap.",
  "Sealed speaker chambers sit within ~5-7 mm of the rear wall for |x| 75..160: no dock fasteners may pierce that zone; use the central zone |x| < 70.",
  "Make the dock a shallow captured slot (carrier slides down), not a shelf: a shelf invites standing and adds tip moment.",
  "The upper rear crossbar (y ~248..260 by default, adaptive above the volume-wheel stack) and the lower rear crossbar (y < 20) bracket the dock region and give the rear wall a closed frame."
 ],
 "unknowns": [
  "Bare SE25 keybed: outline, PCB position, mounting holes, key travel and cable exits",
  "Display module depth and driver board location",
  "Unit mass and centre of gravity",
  "PA12 creep factor in the chosen process/colour/moisture state",
  "MAX98357A SD_MODE thresholds (datasheet not retrieved) and whether the 6513 board exposes SD",
  "WM8960 jack-detect capability (datasheet not retrieved)",
  "Masses of jacks, rockers, encoders and bearings (not published on retrieved pages)",
  "Distributor stock for all parts except the two Adafruit pages read on 2026-11-05"
 ]
}